Quick Change Tool Post Installation on C2,SC3 lathe Model 000 Wedge Type Quick Change Tool Post Set This Model 000 Quick Change Tool Post Set: Essential set is supplied with: 1 x Model 000 Wedge Type Tool Post 2 x Model 000 Standard Tool Holder 1 x Model 000 Tool Holder with V- Groove Delux set is supplied complete with:1 x Model 000 Wedge Type Tool Post 2 x Model 000 Standard Tool Holder 1 x Model 000 Tool Holder with V- Groove 1 x Model 000 Boring Tool Holder 1 x Model 000 Parting Tool Holder - Angled/Horizontal1 x Model 000 Knurling Tool Holder The Model 000 quick change tool post is a wedge type tool post system designed specifically to work on small lathes that have limited swing over the compound. This set is for lathes with up to 210mm/8" swing and is suitable for SIEG SC4 lathe or similar.The tool post and tool holders are of hardened steel construction for excellent rigidity and the mating faces are ground for better repeatability when changing tools. Specifications for the Tool Post: The Model 000 Quick Change Tool Post is a wedge type quick change tool post system that uses sliding wedges in the dovetails of the tool post to clamp tightly on the tool holder dovetail. This cut-away view shows how the sliding wedges have teeth which engage in the thread of triple start screw operated by the locking lever. A: 44.5mmB: 66mmC: 40mmD: M10x1.5mm Thread Specifications for the Standard Tool Holder: This tool holder is designed to hold square tools up to 10mm.A: 28mmB: 13.5mmC: 8.5mmD: 17.25mm Specifications for the V-Groove Tool Holder: This tool holder is designed to hold square tools up to 10mm and round tools diameter up to 8mm.A: 28mmB: 13.5mmC: 8.5mmD: 17.25mm Specifications for the Boring Tool Holder: This boring tool holder is designed to hold ø10mm round tools using the split sleeve (included) and ø12mm without the sleeve.A: 30mmB: 12.4mmC: ø10mm with sleeve, ø12mm without sleeve Specifications for the Parting Tool Holder (Angled): This parting tool holder will hold parting blade up to 13.5x3.2mmA: 35mmB: 13.5mmC: 3.2mm Suitable Blades:HSS Parting-off Blade 3/32"x1/2"x4.1/2" Tapered M42 HSS-Co8 Parting-off Blade 2x13x110mm Note:This tool holder is not suitable for C2,C3,SC3 or similar lathes since the 4° angle raises the tool higher than the centre. Please choose the Parting Tool Holder (Horizontal). Specifications for the Parting Tool Holder (Horizontal): This parting tool holder will hold parting blade up to 13.5x3.2mmSpecifications:A: 35mmB: 13.5mmC: 3.2mmD: 2.5mm Specifications for the Knurling Tool Holder: A: 30mmB: 13.5mmC: 8mmD: 3.5mmE: 13mmF: 44mm
