This dedicated IR illumination head outputs IR light in the 850nm IR spectrum, for use with night vision only. It's capable of illuminating targets out to 300 yards or further depending on atmospheric conditions. The reflector is designed to deliver a good amount of spill and a well-defined hot spot. This is our highest-performance IR head and best suits those looking for the most throw. Unlike our white light heads which utilize a Multi-Mode that prioritizes the High output, IR Multi-Mode operates with a "Admin/High" prioritization, making for more accessible handheld and helmet worn admin lighting. If Admin mode is not desired, this can be locked out and the light can be run in a "High only" state for weapon-mounted applications. Runtime with 18650: "High Only" Mode will have a 75 minute runtime."Multi-Mode" will have both the Admin and High modes for quick switching between outputs. High mode will have a 75 minute constant runtime. Admin mode will have a 10.6 hour runtime and is 15% of the high output. Runtime with 18350: High Mode will have a 35 minute runtime."Multi-Mode" will have both the Admin and High modes for quick switching between outputs. High mode will have a 35 minute constant runtime. Admin mode will have a 3.6 hour runtime and is 15% of the high output. Due to the chemical process that takes place during Type 3 Hardcoat, the finish on the product can vary from one to the next, even if it is the same batch. We strive to create as tight of a range as possible, and match parts to the best of our ability, but be aware that there may be slight variation between sections of the light. Features Multi-mode (Admin/High) Dual Fuel 18XXX Rechargeable or x2 CR123 Made and assembled in the USA Drivers are fully potted and tested to withstand select-fire SCAR 17 recoil Lifetime guarantee 6061 Series Alum bezel with Mil-Spec Hard Anodizing Ultra-clear BOROFLOAT® lens allows 98-99% light transmittance Multi-Mode Heads: Can be powered by an 18350, 18650 or x2 CR123 Weight: Width/Diameter: Length: 2.1 oz 1 1/4" 1 3/4 "
