The Modular Systems WS1 is a commercial solid wall shelf that puts frequently used stock and tools within reach without consuming bench space. It is built from 1.2 mm SUS304 (18/8) stainless steel with a hairline finish, mounts flush to the wall on triangular gusset brackets, and carries a rear upstand so splash and spillage do not run down the wall behind it. Five widths from 600 mm to 1800 mm, all 300 mm deep and 300 mm high. Why operators choose the 1200-WS1 1.2 mm SUS304 (18/8) stainless steel — the grade and gauge that survives commercial cleaning chemicals and daily knocks, rather than dishing under load Rear upstand for splash protection — stops spills running down the wall behind the shelf, which is what keeps a wall-mounted shelf hygienic Triangular gusset support brackets — the bracket geometry that stops a loaded shelf sagging at the front edge Hairline finish — brushed rather than mirror, so it hides working marks instead of showing every fingerprint Five widths from 600 to 1800 mm — match the shelf to the wall run instead of leaving gaps or overhanging Flat-packed with manual and tools — comes through a standard doorway and assembles on site rather than needing to be carried in built 300 mm depth — enough for stock and containers without intruding on the working area beneath Wall-mounted, no floor footprint — adds storage in a kitchen that has run out of bench and floor space Specifications Brand Modular Systems Range / series WS1 Solid Wall Shelf Type Stainless Steel Solid Wall Shelf Material 304 (SUS304 18/8) stainless steel, 1.2 mm Finish Hairline Shelf Solid, with rear upstand Mounting Wall-mounted on gusset support brackets Depth 300 mm Height 300 mm Supplied Flat-packed with instruction manual and tools Supplier F.E.D Warranty 2 years parts only (labour not included) Size options Choose the option matching your fit-out when ordering. Each is a separate SKU. Size SKU 600(W) x 300(D) x 300(H)mm 0600-WS1 900(W) x 300(D) x 300(H)mm 0900-WS1 1200(W) x 300(D) x 300(H)mm 1200-WS1 1500(W) x 300(D) x 300(H)mm 1500-WS1 1800(W) x 300(D) x 300(H)mm 1800-WS1 Venue suitability The WS1 suits any commercial kitchen, cafe, bakery, bar or canteen fit-out that needs storage above the working line — dry goods, containers, small equipment or service items. Because it is wall-mounted it adds capacity without taking floor space, which matters most in the tight fit-outs where shelving is needed in the first place. Compare the full range of commercial stainless steel shelving or see more from Modular Systems. Installation & delivery It is supplied flat-packed with an instruction manual and tools, and is designed for quick assembly on site — which also means it comes through a standard doorway rather than needing to be manoeuvred assembled. It mounts to the wall on the supplied gusset brackets, so confirm the wall construction will take the fixings and the load you intend to put on it — a masonry or stud-backed wall is straightforward, plasterboard alone is not. Dispatched from our Sydney HQ with partner warehouses in Melbourne, Brisbane, Adelaide and Perth for faster delivery Australia-wide. Backed by a 2-year parts only warranty — labour is not included. See our warranty information page for full terms. Frequently asked questions Q: What grade of stainless steel is this wall shelf? A: 304-grade (SUS304 18/8) at 1.2mm thickness with a hairline finish. That is the grade used through commercial kitchens for its corrosion resistance. Q: What sizes are available? A: Five widths — 600, 900, 1200, 1500 and 1800mm — all 300mm deep and 300mm high. Each width is a separate SKU. Q: Does it arrive assembled? A: No. It is supplied flat-packed with an instruction manual and tools, which is also how it fits through a standard doorway. Q: What is the rear upstand for? A: It is a raised lip along the back edge that stops spills running down the wall behind the shelf. It is the difference between a shelf you can keep clean and one you cannot. Q: What do I need to mount it? A: The gusset brackets and fixings guidance are supplied. Confirm your wall can carry the fixings and the intended load — masonry or stud-backed is fine, plasterboard alone is not. Q: What warranty applies? A: Two years parts only. Labour is not covered, which is worth factoring in when budgeting for service on a fabricated item. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "What grade of stainless steel is this wall shelf?", "acceptedAnswer": { "@type": "Answer", "text": "304-grade (SUS304 18/8) at 1.2mm thickness with a hairline finish. That is the grade used through commercial kitchens for its corrosion resistance." } }, { "@type": "Question", "name": "What sizes are available?", "acceptedAnswer": { "@type": "Answer", "text": "Five widths — 600, 900, 1200, 1500 and 1800mm — all 300mm deep and 300mm high. Each width is a separate SKU." } }, { "@type": "Question", "name": "Does it arrive assembled?", "acceptedAnswer": { "@type": "Answer", "text": "No. It is supplied flat-packed with an instruction manual and tools, which is also how it fits through a standard doorway." } }, { "@type": "Question", "name": "What is the rear upstand for?", "acceptedAnswer": { "@type": "Answer", "text": "It is a raised lip along the back edge that stops spills running down the wall behind the shelf. It is the difference between a shelf you can keep clean and one you cannot." } }, { "@type": "Question", "name": "What do I need to mount it?", "acceptedAnswer": { "@type": "Answer", "text": "The gusset brackets and fixings guidance are supplied. Confirm your wall can carry the fixings and the intended load — masonry or stud-backed is fine, plasterboard alone is not." } }, { "@type": "Question", "name": "What warranty applies?", "acceptedAnswer": { "@type": "Answer", "text": "Two years parts only. Labour is not covered, which is worth factoring in when budgeting for service on a fabricated item." } } ] }
Related
Related
Related
Related