Buyer’s Guide Read the full guide to the MoFi SourcePoint 10 Master Edition Compare the MoFi SourcePoint Loudspeakers Plain-English Guide: what every feature does Audiophile Deep Dive: the engineering explained Specs Design Two-way passive stand-mount loudspeaker Driver 10 inch concentric point-source driver (soft-dome tweeter at the acoustic center of the mid-bass cone) Crossover Master Edition upgraded crossover with premium components Sensitivity 91dB Nominal Impedance 8 ohm (true) Minimum Impedance 6.4 ohm near 150Hz Low Frequency Extension 42Hz Port Rear-ported cabinet Amplification Passive; requires a separate amplifier WarrantySold as an authorized MoFi Electronics dealer by All Elite Audio. New MoFi SourcePoint 10 Master Edition units include the full MoFi Electronics manufacturer warranty of 5 years parts and labor for the original owner. Contact us with any setup or service questions.What's in the Box SourcePoint 10 Master Edition loudspeakers (pair) Magnetic grilles Documentation OverviewThe MoFi Electronics SourcePoint 10 Master Edition is a two-way stand-mount loudspeaker built around Andrew Jones's concentric point-source driver, a soft-dome tweeter positioned at the acoustic center of a 10 inch mid-bass cone. This coincident arrangement means the high and low frequencies radiate from the same point in space, producing a true point source with wide, even dispersion and a stable, focused stereo image that holds up across a large listening area.The Master Edition designation refers to the upgraded crossover, which uses premium components to refine the transition between the tweeter and mid-bass cone. Sensitivity is a generous 91dB with a true 8 ohm impedance that dips no lower than 6.4 ohm near 150Hz, so the speaker is an easy and forgiving load. Low frequency extension reaches 42Hz from a rear-ported cabinet, giving the SourcePoint 10 Master Edition genuine weight and scale for a stand mount.This is a passive loudspeaker, which means it needs a separate amplifier to make sound. It suits listeners who want the coherence and imaging of a point-source design in a compact footprint, and who plan to pair it with a quality integrated amplifier or preamplifier and power amplifier. It rewards careful source and amplification choices and scales convincingly with better upstream electronics.Key Features Two-way stand-mount design with an Andrew Jones concentric point-source driver 10 inch mid-bass cone with a soft-dome tweeter at its acoustic center for true point-source radiation Master Edition upgraded crossover using premium components High 91dB sensitivity for an easy amplifier match True 8 ohm impedance with a 6.4 ohm minimum near 150Hz for a friendly load Low frequency extension to 42Hz with a rear-ported cabinet Wide, even dispersion for a large, stable sweet spot Passive design that scales with high quality amplification How the SourcePoint 10 ME ComparesMoFi SourcePoint 10 Master Edition vs MoFi SourcePoint 8The SourcePoint 8 uses a smaller concentric driver in a more compact cabinet, making it a natural fit for nearfield and smaller rooms where its tidy footprint is welcome. The SourcePoint 10 Master Edition steps up to a 10 inch concentric driver with deeper low frequency extension to 42Hz and the upgraded Master Edition crossover, giving it more scale and refinement. Choose the 8 for tighter spaces and the 10 Master Edition when you want fuller weight and greater resolution. See the MoFi SourcePoint 8.MoFi SourcePoint 10 Master Edition vs Spendor Classic 3/1The Spendor Classic 3/1 follows the BBC-influenced tradition with a warm, midrange-forward voicing prized for long-term listening and natural tone. The SourcePoint 10 Master Edition takes a different route with its concentric point-source driver, prioritizing pinpoint imaging and consistent dispersion across a wide seating area. Both are capable stand mounts, so the choice comes down to whether you favor classic voicing or point-source coherence. See the Spendor Classic 3/1.MoFi SourcePoint 10 Master Edition vs Amphion Argon 1The Amphion Argon 1 is a compact stand mount that uses controlled directivity for a focused presentation in smaller and near-field setups. The SourcePoint 10 Master Edition is a larger design with a 10 inch concentric driver, greater sensitivity, and deeper bass extension for bigger rooms and more scale. Consider the Argon 1 for a compact monitor and the SourcePoint 10 Master Edition when you want more output and low end reach. See the Amphion Argon 1.Recommended Amplification and SourceThe SourcePoint 10 Master Edition is a passive speaker, so it needs an amplifier, and MoFi does not make amplifiers. These picks are easy matches for its 91dB sensitivity and friendly 8 ohm load, and a MoFi analog front end makes a natural source. Luxman L-505Z Integrated Amplifier A refined integrated with the control and finesse to reveal the concentric driver's imaging, and more than enough grip for this easy 8 ohm load. Accuphase E-3000 Integrated Amplifier A powerful, transparent integrated that lets the SourcePoint 10 Master Edition scale effortlessly while preserving detail and tonal purity. Yamaha A-S2200 Integrated Amplifier A clean, well-built integrated that pairs neatly with the speaker's high sensitivity and offers a balanced, resolving presentation in one box. MoFi UltraDeck Turntable A MoFi belt-drive turntable makes a natural analog source, with its Delrin platter and isolated motor delivering a stable, quiet foundation for vinyl playback. MoFi MasterTracker MM Cartridge MoFi's top moving magnet cartridge tracks confidently and resolves fine detail, complementing the resolution of the concentric driver when fed through a MoFi phono stage. Frequently Asked QuestionsWhat is the SourcePoint 10 Master Edition?It is a two-way passive stand-mount loudspeaker from MoFi Electronics, built around an Andrew Jones concentric point-source driver with a Master Edition upgraded crossover.What makes the driver a point source?The soft-dome tweeter sits at the acoustic center of the 10 inch mid-bass cone, so the highs and lows radiate from the same point in space for coherent imaging and wide dispersion.What does the Master Edition designation mean?The Master Edition uses an upgraded crossover with premium components to refine the transition between the tweeter and mid-bass cone.Does the SourcePoint 10 Master Edition need an amplifier?Yes. It is a passive speaker and requires a separate amplifier. MoFi does not make amplifiers, so you will need an integrated amplifier or a preamplifier and power amplifier.How sensitive is it?Sensitivity is 91dB, which makes it an easy speaker to drive and a friendly match for a wide range of amplifiers.What is the impedance?It presents a true 8 ohm impedance with a minimum of 6.4 ohm near 150Hz, an easy load for most amplifiers.How low does it play?Low frequency extension reaches 42Hz, giving it real weight and scale for a stand-mount speaker.Is it ported or sealed?It uses a rear-ported cabinet, so allow some room behind the speakers for proper airflow and bass performance.How much power does it need?Thanks to its 91dB sensitivity it does not demand high power, but it scales well with quality amplification, so a capable integrated or separates let it perform at its best.Does it need speaker stands?Yes. As a stand-mount design it should be placed on rigid stands that position the driver near ear height for the best imaging.How far from the wall should I place them?Because they are rear-ported, they benefit from some breathing room behind them. Experiment with distance from the rear wall to balance bass weight and clarity.How does it compare to the SourcePoint 8?The SourcePoint 8 uses a smaller concentric driver in a more compact cabinet for tighter spaces, while the SourcePoint 10 Master Edition offers a larger driver, deeper extension to 42Hz, and the upgraded Master Edition crossover.What amplifiers do you recommend?A premium integrated such as the Luxman L-505Z, Accuphase E-3000, or Yamaha A-S2200 pairs well, or you can run a separate preamplifier and power amplifier for more flexibility.What is a good analog source?A MoFi belt-drive turntable like the UltraDeck, paired with a MoFi phono stage and the MasterTracker cartridge, makes a natural and coherent analog front end.Can I use it in a home theater?Yes. Its point-source design and wide dispersion make it well suited to front left and right duties, and MoFi offers matching center channels within the SourcePoint range.What finishes are available?Please contact us for current finish availability, as MoFi offers the SourcePoint range in several cabinet finishes.Is a cartridge or amplifier included?No. The SourcePoint 10 Master Edition is a passive loudspeaker only. Amplification and any source components are purchased separately.Who is this speaker for?It suits listeners who want the coherence, imaging, and even dispersion of a true point-source design in a compact stand-mount form, paired with quality electronics.What is the warranty?MoFi Electronics provides a 5 year parts and labor warranty to the original owner when purchased from an authorized dealer.Why buy from All Elite Audio?All Elite Audio is an authorized MoFi Electronics dealer in Maryland, so your purchase is backed by the full manufacturer warranty and expert support. We can help you match the SourcePoint 10 Master Edition with the right amplification and source for your room.
![MoFi Electronics SourcePoint 10 Loudspeakers [Pair]](https://cdn.shopify.com/s/files/1/0584/4457/8994/products/SourcePoint10__0003_MoFi_SourcePoint_10_Stands_Speaker_Black_Pair.png?v=1676069042&width=480)
Related
Related
Related
Related