Unit Size Net Weight Pint Kit 2 lb Gallon Kit 16 lb Five Gallon Kit 80 lb Mold Star 14T is an easy to use Shore 14A translucent platinum silicone that features a relatively low viscosity, and vacuum degassing is not required for most applications. Mold Star 14T cures in to a soft, strong rubber that is tear resistant and exhibits very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Mold Star 14T silicone can be thickened with THI-VEX thickener for brush-on application and effects. An infinite number of color effects can be achieved by adding Silc Pig silicone pigments or Cast Magic effects powders. Mold Star 14T is heat resistant up to 450F (232C) and is suitable for casting low-temperature melt metal alloys. Material is skin safe and certified by an independent laboratory.Note: This product will not cure against surfaces containing sulfur, even when sealed. PropertiesTechnical Properties Mix Ratio by Weight 1A:1B Mix Ratio by Volume 1A:1B Pot Life 3 minutes Cure Time 9 minutes Color Translucent Shore Hardness 14 A Mixed Viscosity 11,000 cps Shrinkage < 0.001 in./in. Specific Volume 25.6 cu.in./lb. Useful Temperature (max)< 450 F Useful Temperature (min)< -65 F Tensile Strength 420 psi 100% Modulus 47 psi Elongation @ Break 740 % Die B Tear Strength 90 pli Documentation Technical Bulletin Special Order Items PRODUCT ADVISORY: The products listed below are currently SPECIAL ORDER items and require pre order. Lead times may vary - For more information please contact our staff.802960 - Mold Star 14T - Five Gallon Kit
