WHAT'S INCLUDED: ADAPTERS: 2x Molex / 9006 WARRANTY: 2 Years TECH SPECS: WIRE THICKNESS: 22 AWG LENGTH: Approx. 4" / 120mm INSULATION: Braided TechFlex INPUT: 9006 Female or Molex Male OUTPUT: 9006 Male or Molex Female COMPATIBILITY: PROJECTORS: 9006 or Molex Male Solenoid Inputs WIRE HARNESSES: 9006 or Molex Female High Beam Outputs HALOGEN BULBS: Not Compatible WHAT'S INCLUDED: DOUBLE STANDARD: In the HID Headlight Retrofit world there are two standards for high beam outputs. "Molex" two pin connectors and 9006. 9006 FEMALE & MOLEX MALE: These will allow you to use another vendors bi-xenon harness with our bi-xenon projectors. 9006 MALE & MOLEX FEMALE: These will allow you to use our bi-xenon harness with another vendors hi/lo bulbs or bi-xenon projectors NOTE: Please note that Male and Female refer to the metal pins inside the plastic housings, not the connector housings themselves. FOR BEST RESULTS: TRS spec's only 9006 Male and Female sockets for our high beam inputs and outputs on our harnesses. Don't make the mistake of thinking your solenoid is dead just because of a poor connection - try our full kit!
