MONITOR AUDIO 6" IN-CEILING SPEAKERS (PAIR) A high performance in-ceiling speaker with a pivoting tweeter joined by a 6” mid/bass driver. With high frequency level adjustment by a boundary compensation control for optimum bass tuning make these speakers ideal when positioning near room corners is the only option. 2-way In-ceiling speaker for surround channels Integrated fully-sealed back box 6” C-CAM® bass driver, C-CAM pivoting tweeter Tri-Grip® fixing system Trim-less, low profile, paintable grille The CP-CT260's pivoting C-CAM® tweeter is joined by a 6” C-CAM bass driver - and high frequency level adjustment by a boundary compensation control for optimum bass tuning when positioned near room corners. The ‘Trimless’ 200 two-way speakers marry C-CAM® bass drivers with a C-CAM gold dome tweeter. Optimum imaging and set-up are established via a pivoting tweeter, high frequency (+3dB / 0dB / -3dB) level adjustment, and Boundary Compensation (on / off) controls. The ‘Trimless’ 200 Series three-way loudspeakers feature our unique Inverted Dual Concentric (IDC®) driver module. The IDC driver module houses a 4-inch C-CAM midrange and 1-inch C-CAM gold dome tweeter. Optimum imaging and set-up are established via the pivoting IDC, high frequency (+3dB / 0dB / -3dB) level adjustment, and Boundary Compensation (on / off) controls. C-CAM® BASS DRIVERS Refined over many years by Monitor Audio, Ceramic-Coated Aluminium/Magnesium is used as a driver cone material for all our speaker designs from the mid-market models up. Originally developed by the aerospace industry for jet engine components, C-CAM's properties are ideal for loudspeaker cones being extremely rigid, yet light enough to yield high overall efficiency. C-CAM bass drivers are able to resist the bending distortion imposed by sudden and extreme bass excursions to reproduce very clean, deep and dynamic bass frequencies. Conventional cone materials are more likely to flex in operation, producing a significant level of audible distortion. Specification Frequency Response 66 Hz – 25 kHz Power Handling (RMS) 65 W Overall Size Round: 285 mm (1 11/4")Square: 285 x 285 mm (1 11/4") Cable Connection Gold plated 'push' type terminals Pre-Construction Bracket CB8 (Green) Nominal Impedance 6 ohms Recommended Amp Requirements 20 – 65 W Mounting Depth 151 mm (5 15/16") Grille Attachment Magnetic Sensitivity (1W@1M) 88 dB Drive Unit Complement 2-Way6" C-CAM cone bass driver1" C-CAM pivoting Gold Dome tweeter Cut-Out Hole Diameter 244 mm (9 5/8") Construction Material Mineral Filled ABS Plastic (RoHS2 Compliant) Maximum SPL (single unit in free space) 106.9 dBA Fixing Type 3 position Tri-Grip dog leg fixings Weight 2 kg (6 lb 2 oz)
