The MONSTER MagPole Lime (MML) is a sturdy six section, 5 push button telescoping extension pole with a fiberglass handle. The end tip has the acme thread. The push buttons make it easy to extend and close the MONSTER MagPole Lime. No twisting of the sections. It closes to 6ft 8 inches. Fully extended, the MONSTER MagPole Lime opens to 23ft (7m). Using the reach of your body height, the fully extended MagPole can reach the metal on ceilings with a height of 23 ft. The MagPole weighs 9 pounds. The MONSTER MagPole Lime is always extended and closed while in a vertical position with the base/weight on the ground. It feel lighter as it is extended and is only lifted a short distance to make the attachment of the ClikMagnets. Although aptly called the MONSTER, it is still the easier option to a ladder or a lift to very tall ceilings. How to use the MONSTER MagPole Lime to install items from the metal on a ceiling. With the MagMover threaded onto the end of the MONSTER MagPole Lime, hold the MONSTER MagPole Lime in a vertical position, with the base resting on the floor. Place the ClikMagnets (attached with LoopLine to your item) onto the MagMover. Keeping the base on the floor and the MONSTER MagPole Lime vertical, extend the sections to the desired height. Lift the MONSTER MagPole Lime and let the ClikMagnets adhere to the metal. Your item is hung. With the MONSTER Magpole Lime still in a vertical position, set the base on the floor and gently close each opened section. Repeat for the next installation. How to use the MONSTER MagPole Lime to remove the ClikMagnets and your items from the metal on a ceiling. With the MagMover threaded onto the end of the MONSTER MagPole Lime, hold the MONSTER MagPole Lime in a vertical position while resting the base on the floor. Rotate out the corkscrews Keeping the base on the floor and the MONSTER MagPole Lime vertical, extend the sections to the desired height. Standing close to the display item, vertically lift the MONSTER MagPole Lime/MagMover the short distance to put a corkscrew FULLY into the ring of each ClikMagnet holding the display. “When I have lifted the “MONSTER” to the ceiling, I like to rest the base on my thigh, or between my knees. This gives my arms full control to direct the corkscrew into the ring of the ClikMagnet.” The curls of the corkscrew will capture the ring of the ClikMagnet. With the MONSTER Magpole Lime still in a vertical position, set the base on the floor and gently close each opened section. Remove the ClikMagnets with their attached LoopLine. They are ready for re-use and installation of the next display. How to use the MONSTER MagPole Lime to guesstimate the required length of line between the ceiling and top of your display item. While in a vertical position, extend the MONSTER MagPole Lime to touch to ceiling. Visualize on the MONSTER MagPole Lime, where the top of your item would be when hanging from the ceiling. Return the base to the floor and gently lie the extended MONSTER MagPole Lime on the floor. Measure the distance between the visualized spot on the MONSTER MagPole Lime and the tip of the MONSTER MagPole Lime. This is the length of line required to hang your item at the desired position above the floor and from the ceiling.
