Mopar Performance Decal

The Pits Verified independent store

→

Code: DGDTSF.002 The Mopar Performance Decal is a clean, bold way to mark your build with one of the most respected names in American performance. Whether it's on the rear windscre en, the toolbox, a helmet, or anywhere else you want to make a statement — this decal delivers. Product Details Classic Mopar Performance logo design High quality outdoor-grade vinyl with protective lamination UV and weather resistant — built to last outdoors Measures 150mm wide x 150mm tall Suitable for rear windscreens, panels, toolboxes, helmets, and more Application Instructions For best results, follow these steps: Clean the surface — wipe the area thoroughly with isopropyl alcohol or a lint-free cloth to remove dust, grease, and moisture. Allow to dry completely. Position the decal — peel back a small section of the backing paper and align the decal where you want it. Use masking tape to hold it in place if needed. Apply gradually — slowly peel away the backing paper while pressing the decal firmly onto the surface with a squeegee, credit card, or your fingers. Work from the centre outward to avoid air bubbles. Remove the transfer tape — once the decal is fully applied, carefully peel back the clear transfer tape at a low angle. If any part of the decal lifts, press it back down and try again. Smooth and finish — run your finger or a squeegee over the decal one final time to ensure full adhesion across all edges. Tips: Apply in mild temperatures (15–25°C) for best adhesion. Avoid applying in direct sunlight or on very cold surfaces. Do not apply to freshly painted surfaces — allow new paint to cure for at least 30 days. Mark your build. Pure Mopar Performance. Show more