MORAVIAN C1 3000C [COLOUR]

Testar Australia Verified independent store

→

The Moravian C1 3000 Colour is a compact fan-cooled colour astronomy camera using the Sony IMX252 CMOS sensor with a resolution of 2064 x 1544 pixels at 3.45μm. The Moravian C1 ser ies are small, lightweight global shutter CMOS cameras designed for planetary imaging and guiding and are available with a wide range of sensors. Unlike the smaller C0 series, all C1 cameras feature fan cooling and a series of threaded holes for easy connection to tripods. C1 cameras are available with both 8- and 12-bit digitization or with just 12-bit digitization which have the "A" designation. Sensor linearity of IMX252 sensor as found in the C1-3000 camera. With proper image calibration, C1 cameras also provide surprisingly good results for entry-level deep-sky imaging. The CMOS sensors found in these cameras have a response to light that is linear very close to the saturation point. This means the C1 series cameras can also be used for scientific applications like variable star research. The C0 and C1 cameras share majority of features, like the sensors used, USB interface, autoguider port, etc. The larger physical dimensions of the C1 models allow for certain features not available on the C0 cameras such as a cooling fan and threaded mounting holes. Moravian C0 and C1 cameras are offered in two different versions with the standard models offering multiple 8- and 12-bit readout modes and the "A" version offering only 12-bit output. Both versions are capable of very short exposure times of 125μs (1/8000th of a second). Sensors used in C0 and C1 cameras offer programmable gain from 0 to 24 dB, which translates to the output signal multiplication from 1× to 15.9×. Gain can be set with 0.1 dB step. Digitization resolution 12-bit 12-bit 8-bit 8-bit Sensor gain 0 dB 24 dB 0 dB 24 dB Full well capacity 11000 e- 1100 e- 2600 e- 1100 e- Conversion factor 2.8 e-/ADU 0.3 e-/ADU 10.0 e-/ADU 4.4 e-/ADU Read noise 2.2 e- RMS 2.0 e- RMS 4.2 e- RMS 9.7 e- RMS C0 and C1 cameras do not require an external power supply to operate. Instead, they are powered via USB to the host computer. The USB 3.0 port operates at 5 Gbps allowing for fast transfer rates. A standard ST-4 port is also included which follows the traditional SBIG ST-4 autoguider wiring. While neither C0 nor C1 cameras are equipped with active TEC cooling modules, C1 cameras employ a small fan to keep the sensor temperature as close to ambient as possible (typically between 7 - 10°C lower) and reduce dark current to less than half. C0 and C1 cameras are supplied with two different telescope/lens adapters by default: a CS mount with 1/32 UN threads and 12.5mm backfocus distance, and an adapter with M42 x 0.75 female threads with 18.5mm of backfocus. Additionally, a 1.25" barrel adapter is also included for straightforward connection to guide scopes and focusers. For more information on Moravian C1 cameras, please refer to the Moravian website. Specifications Sensor CMOS Sony IMX252 colour Resolution 3.1 megapixels 2064 x 1544 Pixel size 3.45 µm Sensor size 7.1 mm x 5.3 mm (8.9 mm diagonal) Quantum efficiency ~61% Exposure range From 125 μs Read noise 2.0 e- @ 24 dB Full well capacity 11,000 e- @ 0 dB Bit rate 12-bit / 8-bit (depending on model) Speed ~263 MPx/s digitization speed (8-bit fast mode) Shutter type Global shutter Cooling Fan-cooled Memory buffer TBD ROI Supported Compatibility Windows, Mac, Linux Protecting window AR coated Ports USB 3.0, ST-4 Back focus 12.5 mm (18.5 with M42 adapter) Connections CS, M42 x 0.75, 1.25" barrel Dimensions 57 x 57 x 47.4 mm Weight 170 g Power supply USB Mechanical diagram showing C1 camera with CS adapter on the left and M42 adapter on the right. Detailed diagrams can be found on the Moravian website. Components of the C0 and C1 Camera system include: C0 camera head with CS-mount adapter C1 camera head with CS-mount adapter C0 camera head with combined T-thread (M42×0.75) and CS-mount adapter C1 camera head with combined T-thread (M42×0.75) and CS-mount adapter C/CS-mount to 1.25” barrel adapter Short (10 mm) variant of C/CS-mount to 1.25” barrel adapter, intended for usage with OAG Off-Axis Guider adapter (OAG) for cooled C1+ and C2 cameras Extension tube with M48 × 0.75 thread and 55 mm back focal distance Extension tube with M42 × 0.75 thread and 55 mm back focal distance (standard T-thread adapter) Adapter for Canon EOS bayonet lens Adapter for Nikon bayonet lens Note: the OAG shown here is not exactly part of the C0/C1 camera system. It is intended for large cameras and only accommodates C0 and C1 camera for guiding. To allow the C0 or C1 camera to work with OAG, it is necessary to use the CS-mount adapter. C0 or C1 camera with T-thread adapter is not compatible with OAG. The C0 and C1 cameras are also compatible with larger OAGs for C3/C4 and C5 cameras, not shown here. Downloads C0 & C1 drivers C0 & C1 user manual Gallery M31 by Martin Myslivec using Moravian C1-3000 and 77mm refractor. Orion Nebula by Martin Myslivec using Moravian C1-3000 and 77mm refractor. Solar prominence by Martin Myslivec using Moravian C1-5000. Show more