The C127C127 comes standard as a combined 7" full colour display and powerful control device with outstanding readability in direct sunlight. With the addition of the Data Logging upgrade it becomes a fully programmable data logger with 120 MB memory. Optional USB Logging provides additional data capacity and flexibility. Numerous supplied display layouts offer fixed graphics with configurable channels and labels, while the optional Display Creator software provides the tools for full screen customisation. The C127 C127 acquires data from other devices, such as an ECU, and can display data channels, warning alarms, lap times, fuel calculations, minimum corner speeds, maximum straight speeds and more. Impressive High Resolution 178 mm (approx. 7") colour LCD display High brightness for sunlight readability Optional internal logging and USB logging 16 full colour (RGB) LEDs; colour, function and intensity are fully programmable Suitable for cars, marine and industrial applications Supports Wideband Lambda from MoTeC PLMs or LTCs Easily integrates with MoTeC CAN based devices such as ECUs and expanders. Full I/O expansion with E888 and E816 GPS Lap Timing Supports T2 Telemetry (with upgrade) IP67 rated housing A composite video input allows for a live on-screen footage, for example from a rear view camera (requires Display Creator) SPECIFICATIONS Display Screen: Colour TFT LCD, anti-reflective Resolution: 800 x 480 resolution, anti-aliased graphics Layouts: selectable fixed layouts (user programmable layouts via optional Display Creator software) 48 user-defined, scrollable message lines with programmable overrides 3 programmable modes with customisable labels Logging - optional (requires upgrades) 120 MB internal logging memory USB logging to a removable storage device Logging rates up to 500 samples per second Fast Ethernet download i2 Standard data analysis software included (Pro Analysis upgrade available) Removable USB Storage Device Options Kingston 32 GB USB3 Flash Drive - fast, low weight and low cost, not mechanically latched or waterproof. MoTeC 32 GB USB3 Data Plug - mechanically latched, waterproof with anodised housing, ideal for exposure to the elements and vibration. Alternative USB storage devices may be used but are not recommended. Inputs 2 x Digital inputs 3 x Speed inputs 1 x Composite video input Inputs - optional (requires I/O upgrade) 6 x Analogue voltage inputs 4 x 0 to 5.46 V, 1.33 mV resolution 2 x 0 to 15.0 V, 3.66 mV resolution 2 Analogue temperature inputs 2 x 0 to 15.0 V, 3.66 mV resolution Outputs - optional (requires I/O upgrade) 4 x low side outputs PWM or switched operation 0.5 Amp max, current limited and thermal overload protected Expanders Compatible with E816 and E888 expanders (providing full functional use) Internal Sensors 3-axis accelerometer, detection range: +/- 5G Dash temperature sensor Sensor supply voltage Battery voltage Communications 2 x configurable CAN buses, with individually programmable CAN bus speeds. 2 x RS232 ports, one with transmit and receive, one with receive only. Power supply Operating voltage: 6 to 32 V DC Operating current: 0.5 A typical at 14 V (excl. sensor currents) Reverse battery protection Battery transient protection Sensor supply currents 5 V sensor supply: 0.25 A maximum 8 V sensor supply: 0.25 A maximum Operating temperature Internal: -20 °C to 70 °C (above 60 °C maximum backlight brightness progressively reduced) Typical ambient temperature range in free air: -20 °C to 55 °C Ingress Protection (IP) Rating The device is rated to IP67 Physical Size: 196.2 x 122.5 x 26.3 mm excluding connector Weight 715 g 1 x 34 pin waterproof connector 1 x mini USB port (located on the back of the device)
