Designed to make suspension service simple and quick. Holds shocks and forks securely while you change oil, re-valve, or change seals. Pivoting head holds parts in any position, with mechanical stops every 45 degrees. Aluminum soft jaw vise holds cylindrically shaped parts utilizing a 4-point grip system. Large side holds 39mm to 69mm diameter parts, small side holds 14mm to 39mm diameter parts. Steel Frame is rigid yet has a small footprint, with four pre-drilled holes in the base for secure mounting to a bench. Movable fluid catch pan with mesh insert, and threaded drain bung.How It Works On Forks:Soft Jaw Fork Peg holds fork slider up for removal of dust seal and seal retaining clip. Repositionable bottom slide bar holds forks compressed while bleeding air (priming cartridge) during reassembly and is an excellent platform for adding, adjusting and taking fork oil level measurements. Can be used to assist in removing compression valve assembly (use of stock front axle required).How It Works On Shocks:.Specifications Holds shock firmly around shock body, shaft or shock reservoir Facilitates removal of piston rod, seal head, shock reservoir caps, chamber pistons or bladder Holds shock to remove shock spring, spherical bearings or needle bearings.
