#14-007 IPR RE-SEAL KIT 94-03 7.3L DIESEL

DIESELORINGS Verified independent store

→

IPR Re-Seal kit New o-rings (2), split backup washer, spacer and nut for the IPR valve that is installed in the High Pressure Oil Pump. OEM kit with PTFE coated Nitrile O-rings. Fo r 1994-2003 7.3L Ford Diesel Powerstrokes Internal o-rings can get worn and have high pressure oil leak by and cause rough idle and poor performance. You may not need a new IPR valve, just replace the worn out o-rings. Is Your Spacer and Nut in Good Condition? SAVE $$ and just buy the o-rings Here is a kit that we offer that just contains the two o-rings and split washer for about $4 less and includes Viton O-rings, not Nitrile! Servicing the IPR that is located on the back of the High Pressure Oil Pump can be a dirty job. As soon as you pull the IPR, oil begins to drain from the reservoir and pump, filling your engine valley with oil.Here is a plug that will make the job easier with little or no cleanup afterwards. This plug will tightly seal the IPR opening with no additional loss of oil into the engine valley. Simply push it in and pull it back out when you are ready to re-install the IPR after servicing it. See the checkbox on the upper part of this page to order one now! Manufactured in the USA (F6TZ-9C977-AN, F6TZ9C977AN, 1825806C91) Item # 14-007 Show more