Mountain Torii Gate gives everyday rooms a clearer focal point without overcomplicating the room. The Mountain Torii Gate wall art from Grandmix is a laser-cut torii-gate-with-Mount-Fuji composition in powder-coated galvanized metal, Japanese gate scene rendered in clean cutwork that reads as design-school graphic art rather than printed canvas reproduction. Available in 5 sizes across Black and White finishes. Why It Works Torii gate with Mount Fuji silhouette: Laser-cut Japanese gate paired with a Mount Fuji backdrop, graphic, modern, and reads beautifully above a meditation-room console, Zen-styled bedroom, or Asian-modern living-room feature wall. Five sizes for any wall span: From 18-inch accent to 47-inch oversized, pick by wall width above a console, vanity, or Zen-corner feature wall. powder-coated galvanized metal + powder-coat: Rust-resistant finish handles indoor humidity, meditation-room placement, and covered outdoor walls, direct rain on a covered porch is acceptable. Studio-planned proportions: The silhouette, spacing, and finish are reviewed against the listed sizes so the piece reads cleanly on the wall. Key Specs Dimensions: Five sizes (H × W): 18 x 14 in / 46 x 35 cm; 24 x 18 in / 61 x 46 cm; 32 x 24 in / 81 x 61 cm; 39 x 29 in / 99 x 74 cm; 47 x 35 in / 119 x 90 cm. Material: powder-coated galvanized metal with electrostatic powder-coat finish (rust-resistant) Finishes: Black, White Weight: From about 1.5 kg / 3.3 lb at the smallest size Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the art's loaded weight. What's Included Mountain Torii Gate (size and finish as ordered) Mounting screws and wall anchors Care instructions How to Use and Install Mark the mounting points on the wall using a level. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the artwork on the screws. Install takes under 15 minutes with a basic drill. Choose anchors rated for your wall material and the art's loaded weight. Care Wipe the powder-coated powder-coated galvanized metal with a soft, dry cloth or microfiber to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents. Designed primarily for indoor walls; covered outdoor placement (porch, patio, balcony) is acceptable including direct rain, the rust-resistant finish sheds water. Rinse off any salt-spray and wipe dry after coastal exposure. Frequently Asked Questions Where does this work best? Meditation rooms, yoga studios, Zen-styled bedrooms, modern-Asian dining rooms, spa-bathroom feature walls, and reading-corner displays all suit this design. The piece pairs well with neutral wall paints, natural wood furniture, and minimalist supporting decor that lets the silhouette breathe across the wall. How does it mount to the wall? Each piece ships with mounting screws and wall anchors. Mark the mounting points with a level for alignment, drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included anchors, and drive the screws. Choose anchors rated for your wall material and the art's loaded weight, drywall, plaster, masonry, or tile. Is it safe for outdoor use? Designed primarily for indoor walls. Covered outdoor placement is acceptable, powder-coated galvanized metal with electrostatic powder-coat finish is rust-resistant and sheds water, so a covered porch, patio, or balcony with direct rain exposure is fine. Rinse off any salt-spray and wipe dry after coastal exposure for longer finish life. How do I match the finish to existing decor? Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes. Match the wall art finish to nearby furniture, hardware, or decor accents for the most cohesive look, especially picture frames, lamp bases, and shelving. How do I clean the wall art? Wipe the powder-coated galvanized metal with a soft, dry microfiber cloth to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works. Avoid abrasive scouring pads or chemical solvents that can dull the finish over time. Rinse off any salt-spray and wipe dry.
Related
Related
Related
Related