WHAT STANDS OUT: Heavy-duty 3M VHB foam tape: Holds up to 3 lb per 2 inches of tape when properly applied for permanent installs. 0.025 in thick foam core: Conforms to uneven surfaces while adding cushioning and vibration damping for a long-term bond. Waterproof and weatherproof: Designed for indoor and outdoor applications, adhering even in damp or harsh weather conditions once cured. Easy, hardware-free installation: Red peel liner and included plastic applicator for fast, clean, no-drill mounting. PRODUCT DETAILS: This HitLights heavy-duty foam mounting tape is built around industrial-grade 3M VHB acrylic adhesive to replace screws, nails, and other mechanical fasteners in permanent mounting projects. Each 2-inch section is rated to hold up to 3 pounds when fully compressed on a clean, smooth surface, making it suitable for demanding residential, commercial, and automotive installs. Each roll provides 32 feet (9.8 m) of black tape at 0.39 inches (9.9 mm) wide with a 0.025 inch (0.64 mm) thick foam core. The viscoelastic foam layer lets the tape conform to minor surface irregularities while cushioning and reducing vibration, which is especially useful for LED strip lights, signage, trim, panels, and plastic components. The acrylic adhesive is waterproof and weather-resistant, so once fully cured it maintains a strong bond indoors or outdoors, even in damp locations and varying temperatures. A red peel-off liner makes placement easy to see and handle, and the included plastic applicator helps fully compress the tape so the adhesive reaches its rated holding strength—no drilling, screwing, or heating required. Adhesive Type: Acrylic, made with industrial-grade 3M VHB adhesive Foam Core Thickness: 0.025 in (0.64 mm) Tape Length: 32 ft (9.8 m) Tape Width: 0.39 in (9.9 mm / 10 mm nominal) Waterproof: Yes, suitable for indoor and outdoor use Flexible Adhesive Tape: Designed to resist curling; simple to peel if not fully compressed WHAT'S INCLUDED: 1 × roll of HitLights heavy-duty foam mounting tape, 32 ft (9.8 m) length, 0.39 in (9.9 mm) width, 0.025 in (0.64 mm) thick FREQUENTLY ASKED QUESTIONS: Q: What is this 32 ft heavy-duty mounting tape used for?A: This is a 3M VHB foam double-sided mounting tape for attaching LED strip lights, signs, trim, panels, mirrors, plastic parts, and other objects without screws or nails. It is intended for permanent, high-strength bonding on clean, smooth indoor and outdoor surfaces. Q: How strong is the adhesive, and how much weight can it hold?A: The tape is rated to hold up to 3 lb per 2 inches of width when properly applied and fully compressed. This corresponds to about 1 lb of holding strength per inch of tape width, so installers should size the tape contact area to match the weight of the item and allow time for the bond to cure. Q: Is this tape waterproof and suitable for outdoor use?A: Yes. The foam mounting tape is waterproof and weather-resistant, so it can be used indoors and outdoors, including in damp environments. Once fully cured, the adhesive withstands moisture and changing temperatures for long-term installations. Q: Does the tape have a foam core, and why does that matter?A: The tape uses a 0.025 inch thick foam core that provides cushioning and allows the adhesive to conform to slightly uneven surfaces. This viscoelastic construction helps absorb vibration and movement, improving performance in automotive, equipment, cabinetry, and LED lighting installs. Q: Is the tape flexible, or does it curl during installation?A: The tape is flexible and designed to resist curling, which keeps long runs flat and easier to manage. As long as it has not been fully compressed, it remains simple to peel back and reposition to fine-tune the alignment of strips, trims, or panels. Q: Is it easy to apply this tape?A: Yes. The red liner makes it easy to see and peel the tape, and the included plastic applicator helps press it firmly into place for full contact. No drilling, screwing, or heating is required—just peel, stick, and compress the tape for a secure bond. Q: Will this tape leave residue when removed, and how should removal be done?A: Because this is a heavy-duty VHB foam tape, removal can be challenging and may leave adhesive behind if not done carefully. To reduce adhesion, warm the tape with a heat gun or steamer, lift an edge with a sharp, flat tool, and peel slowly at a low angle; any remaining residue can be removed with a surface-safe adhesive remover compatible with the substrate. SHIPPING DETAILS: Standard Shipping (3-5 Days) - Shipping cutoff 3PM (PST). FREE ground shipping (UPS or FedEx) on orders of $199 or more Standard Shipping: Flat Rate $9.99 - Cutoff 3PM (PST) 2-Day Shipping: Rate Based on Weight - Cutoff 2PM (PST) Overnight Shipping: Rate Based on Weight - Cutoff 2PM (PST)
Related
Related
Related