MoTeC's multi-button backlit CAN Keypads provide a switching solution that can be customised and connected to any MoTeC PDM. The buttons can be used as inputs to control the PDM and other devices in the vehicle. The three LED lights along the top of each button can be used to indicate the state of the devices. Four separate Keypads, each with up to 15 keys, can be combined on a single CAN bus and controlled by the same PDM (factory configuration required). Features Small, lightweight and compact package Rugged design – vibration, and impact resistant for use in extreme environments Dust and water resistant - sealed to IP67 Dimmable LED indicators above each button for real-time feedback Backlit buttons Pre-designed semi-transparent labels supplied Supports multiple key press combinations Simplified wiring - only 4 wires required for multiple buttons Short circuit and reverse polarity protection Specifications Configuration All configuration is done via PDM Manager software: CAN addressing, function, backlight brightness, status LEDs etc. Communications Single CAN bus Capacity on CAN Bus Up to 4 Keypads, with up to fifteen keys each Advise your dealer if multiple Keypads are required on the same CAN bus. Use of multiple Keypads will require the units to be pre-configured before supply. LED Status Lights Colours: green, orange, red Power Operating voltage: 8 to 32 V DC Operating current: 0.2 A maximum Reverse battery protection Short circuit protection Ambient Operating Temperature -40 °C to 85 °C Physical 1 x 4 pin Deutsch DT connector Size (without connector): 104.7 x 62.82 x 15.52 mm Weight: 105 g
