Product Highlights Built-in retractable carry ringThe built-in carry handle makes it convenient and easy to maneuver in and out of trees. IntelliCarb™ Compensating CarburetorThe IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box. Purge Pump PrimerThe purge pump primer feature enables the user to prime the carburetor with fuel, enabling easier starting. The purge pump primer is designed in a way that the operator cannot flood the machine by priming the carburetor too many times. Flooding the engine is still possible if the choke is not removed after the engine turns over.See it in action! Side-Access Chain TensionerThe side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw. Top handle (T)The top-handle model is specially designed for in-tree professional use only! STIHL Quickstop®STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.See it in action! Ematic™ Lubrication SystemThe Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%. Master Control Lever™The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position. Built in the USAA majority of STIHL gasoline-powered units sold in the United States are built in the United States from domestic and foreign parts and components. More Information MS 194 T Specifications POWER SOURCE Gas POWERHEAD WEIGHT 7.28 lbs. GUIDE BAR LENGTH (Recommended) 14 in. OILOMATIC® CHAIN 3/8" PM3 CHAIN OIL CAPACITY 7.4 oz. ENGINE POWER 1.88 bhp FUEL CAPACITY 9.1 oz. DISPLACEMENT 1.94 cu. in.
