Utilizing the the most popular of Science Templates the Style we introduce The Warp, the latest MS Concept board. The Concept: A board that maintains maximum speed while in turns. Solution: Deep twin wings on a generally rounded pin tail outline, combined with deep multi channel system Experience full throttle speed during long arcing turns or rail to rail transitions. Outer and inner wings work, or as we call Dual Delta Tail, is paired with the Deep Quad Vent channel system for maximum hold and control. The generally rounded pin tail outline allows for the smoothest of turning transitions. Specs: Core: 1.9PP Kinetic Polypro Core (PP) Deck: Wavecushion Air 8lb PE Deck Stringer: 1x Stringer Slick: Surlyn Slick Skin Channels: Deep Quad Vent (DQV) Tail: Dual Delta Additional Features: 55/45 Double Rail Nose Bulbs Slick Mesh Palm Welds Full Body Deck Contour Elbow Locks Nose Bulbs From Mike Stewart himself: "Here are some key takeaways from my time with the Warp"1. While the tip of the tail is the measured length of the board, the ends of the rails are much shorter. For example, on a 42" board, the rails are only 40" in length, so this gives the effect of riding a much smaller board, which is much more maneuverable. Doing tight spins, for example, in the pocket, is very easy and quick. Making a split-second decision to get to the lip is also more easily done. Because of the rail length compared to the board length, you might want to consider going up by a half inch from what you normally ride so that the board feels a bit more normal.2. The second or inner wing creates a hold closer to the center of the tail, making the tail harder to slide out. This allows for a slightly more forward weight distribution than on normal designs, which is felt in noticeable acceleration while trimming.3. The deepened quad vent channels further enhance this hold."In summary, I find the board to be significantly easier to maneuver and especially responsive, yet it holds well and doesn’t slide out easily. Reverse off the lips, for instance, requires the board to be flatter to the wave face to accomplish the same hold and rotation. If you get a warp, please share your feedback so we can share ideas and consider tweaks for future variations. MS"Dimensions: Length Nose Tail Width Nose to widepoint Thickness 42" 11.75" 18 5/8" 21.5" 18 7/8" 53mm 43" 12" 19 1/8" 22" 19 3/4" 54mm
