MSK-TE906-H100P is a programmable temperature & humidity test chamber designed for safety testing of lithium-ion batteries and battery packs. It simulates controlled environmental conditions to evaluate battery safety performance under various temperatures and humidity. The chamber provides a temperature range of -40°C to 150 °C and a relative humidity range of 20% to 98% RH. SPECIFICATIONS: Power Requirement Working Voltage: AC220V±10%, Single Phase, 50Hz Output Power: Approx. 5KW Test Chamber Exterior chamber constructed from powder-coated galvanized steel; interior constructed of SUS304 stainless steel. Insulated with rigid polyurethane foam and ultra-fine fiberglass Internal Chamber Dimensions: 500mm x 400mm x 500mm (W x D x H) Maximum chamber load capacity: 20 kg/m^2 Includes three adjustable sample racks. Equipped with two Ø100mm access ports with rubber plugs Chamber Door Hinged chamber door with a hollow-glass observation window Built-in chamber illumination for clear interior visibility Cooling & Heating System Temperature Range: -40 °C to 150 °C Temperature Resolution: 0.01 °C Temperature Uniformity: ≤±2 °C Heating Rate: average 5 °C/min under non-linear load, from -40 °C to 75 °C Cooling Rate: average 1 °C/min under non-linear load, from 75 °V to -40 °C Humidity Control Humidity Range: 20% to 98% Relative Humidity Deviation: ≤ ± 3.0% RH Control Panel 7-inch TFT color LCD display Program mode and constant value mode are selectable Display Resolution: Temperature: 0.01 °C; Time: 0.01 min; Humidity: 0.1% RH Noise Level A-weighted sound level ≤ 65 dB(A) Safety Protection Over-temperature protection for the test chamber Thermal fuse for the test space Fan overheting protection Leakage protection circuit breaker Emergency pressure relief port with a rupture disk on the side of the equipment Water supply, drainage, and abnormality protections Water Storage 18 L portable drawer-type water tank on the right side of the chamber Compliance CE NRTL or CSA certification is available upon request at an extra cost.