Muddskip drywall additive transforms existing drywall compound. both dry mix and premix formulas, into a product that looks, acts, and performs like plaster, as a drywall mud. ✔Reduce labour by 50% - apply Wet on Wet coats (dry to touch) in same day ✔Minimal to NO sanding in between coats ✔Increase tensile strength and hardness of compound improving bond capacity Heavy Duty 3in1 Drywall AdditiveMuddskip Drywall Additive is a REVOLUTIONARY product that transforms existing drywall products, both dry mix and premix formulas, into a product that looks like plaster, acts like plaster and performs like plaster as a drywall mudd. Obtain a SMOOTH FINISH with less labor, less time and No Sanding. The Heavy Duty 3 in 1 for Base Coat and Skip Finish can be added to dry quickset mix. It transforms the quick set into a smooth base coat that can be finish coated within minutes of application to complete the skip trowel finish you desire. Ready for primer and paint the following day. Beautiful and consistent results have been shown with all leading drywall joint compound manufacturers’ products in our testing. Find out more about MuddskipTM 3in1 Drywall Additives in this press release. MIXING INSTRUCTIONS: Thoroughly mix in ONE Muddskip BAG or 3 lbs. from Muddskip bucket into one bag, box, or bucket of joint compound (typically 18 lbs bag, 3.5 lbs box, or 4.5 gallon bucket size). Reduce Muddskip amount proportionally if using a partial joint compound bag, box, or bucket amount. Add water as needed for mixing and application. Level 5 Smooth 3in1 Drywall AdditiveTHERE IS NOTHING LIKE IT. Level 5 Smooth 3in1 Drywall Additive is amazingly easy, fast and No Sanding to get the smooth Level 5 finish. Works with drywall products, both dry mix and premix formulas, into a plaster that is quick and a dream to use. Double your coverage to 800-1,000 sq ft for a regular 500 sq ft bucket of drywall mudd. This is because there is no need to sand off your product and add new coats. Finish the job in ONE DAY: 1) Apply the tape seams with Muddskip Heavy Duty Basecoat to fill in gaps and smooth with a trowel. 2) After seams dry (about 90 min) or dry to touch, apply Muddskip Heavy Duty Basecoat to the entire wall. 3) After dry to touch (about 60-90 minutes depending on humidity), apply Muddskip Level 5 Smooth finish coat to get the desired Level 5 finish, skip trowel or textured finish with roller. No sanding needed. Job finished with more money in your pocket. Find out more about MuddskipTM 3in1 Drywall Additives in this press release. MIXING INSTRUCTIONS: Thoroughly mix in ONE Muddskip BAG or 3 lbs. from Muddskip bucket into one bag, box, or bucket of joint compound (typically 18 lbs bag, 3.5 lbs box, or 4.5 gallon bucket size). Reduce Muddskip amount proportionally if using a partial joint compound bag, box, or bucket amount. Add water as needed for mixing and application. Muddskip Finisher and Conditioner ConcentrateMuddskip Finisher is used to obtain a Venetian Smooth Look and a harder finish. (Mix one part conditioner concentrate to 3 parts cold water for a finishing mist that is sprayed on wall while polishing with trowel or smoothing blade). If using as a conditioner: (add 8 oz of concentrate directly into joint compound mixture as you are mixing the Muddskip additive into the bucket using cold water) Mix for 5 minutes to consistency desired for working on the wall whether rolling or troweling it on. More Videos >>
