Designed and made in the heart of the UK from 100% recycled polypropylene and building on the award winning, tried and tested Rear Mudhugger, now with 3 signficant improvements over their original 2012 design. 1. Utilising reusable quick release straps to fit to the Helitape protected seat stays, makes fitting and removing a matter of seconds2. Where the Mudhugger sits on the seat stays they have incorporated rubber inserts which aids grip and improves damping3. An all new push-fit BB extender is included. Designed to protect bearings and the BB area from mud and debris build up, in even the most extreme conditions. This has been designed to be as thin as possible, so that it can be easily trimmed to suit most bike rear triangle designs* These can be fitted to most mountain bikes with disc brakes, including those with externally routed cables and hoses. The Original version is designed for 26" Mountain Bikes both suspension and hardtails Length - 560mm Width - 100mm wide at the widest part. Weight - 230g Braces are approx 140mm long. Does not include a bottom bracket front extension piece The MK2 MEDIUM version is designed for frames with a seat stay angle from 34 degrees down to 27 degrees: Length - 690mm Width - 105mm BB Extension - 230mm long x 80mm wide Weight - 280g excluding fittings. The MK2 LARGE version is designed for frames with a shallow seat stay angle of below 28 degrees down to 22 degrees: Length - 760mm Width - 105mm BB Extension - 230mm long x 80mm wide Weight - 300g excluding fittings. All Medium and Large MK2 Rear Mudhuggers come supplied with: 2 x Helitape sheets to protect seat stays.4 x Reusable hook and loop straps2 x Rubber damping strips1 x BB extension pieceFitting instructions. We recommend that you periodically check the condition of the Helitape for signs of wear. Spare packs of Helitape are available seperately. Replace as necessary. Also regularly check the velcro for build up of dirt etc, wash and dry as required. Replace these if any signs of tearing or the velcro hook and loop becomes worn and loses its stickiness. Spare straps are available seperately. Zip-ties can also be used to fit the Mk2 Rear Mudhugger to your bike for a semi-permanent mounting if you prefer. If your seat stay brace is located very close to the tyre, you may not be able to utilise the BB extender. If you're unsure, email us a photo of this area of your frame before placing your order.
Related
Related
Related
Related