A clever case solution for the transportation of expensive multicore and other cables in an organised way. The heavy duty built case is made from 9.5 mm birch plywood with a black rigid PVC finish. The case is fitted with interlocking aluminium sections to the joint edges to give a splash proof seal. Edges are fitted with 30 mm aluminium angle riveted every 100 mm. Large zinc coated pressed steel ball corners and edge brackets will increase strength and protection. The lid is secured to the base with two large butterfly type catches at the front and two lid stays with piano hinge at the back. Eight recessed sprung handles are fitted as shown. The lid is fitted with 4 castor stacking dishes and an A5 gig label dish. Internally the case is lined with 3mm black hard wearing carpet all round. Two pipes are fitted to enable figure of eight cable management. The two pipes can be unscrewed for faster removal of the cable when on site. The ends also have a small flap so the cables can be left running out of each end of the case while the lid is closed. Lead time is 2-3 weeks. Please contact us first to get discount on a bulk order.
