The Thinkware MULTSC 1080P Full HD Side External Camera is designed for recording the side of the vehicle and is to be used in conjunction with Q200, F200PRO, F790, T700 and X800 Dash Cam models and the MULTMOD Multiplexer Module. The IP68 rated weatherproof camera mounts on the exterior side of the vehicle, making it the perfect for capturing incidents and events that would normally not be captured by a front or rear dash cam. Its 1080P Full HD resolution combined with a 126 degree viewing angle produces clear footage even in low-light conditions. It comes supplied with 1.4M cable fixed to the camera plus an additional 3M extension cable, providing 4.4M total cable length. If additional length is requirement F100EX6M 6m extension cable can also be used (sold separately). The camera features a loop system, it is set as left side default and can be changed to right side by simply cutting the white loop on the cable during installation. Features: Compatible with Thinkware Q200, F200PRO, F790, T700 and X800 Dash Cam models Compatible with Thinkware MULTMOD Multiplexer Module Designed to record footage on the left or right side of the vehicle Ideal for capturing footage at the side of the vehicle where a traditional dash cam would not Full HD 1080P produces clear crisp high definition recordings 126 Degree angle captures a wide field of view IP68 Rated black weatherproof body Mounts on the exterior at the side of the vehicle Default left side camera, cut loop on cable to change to right side 4.4M Total cable length, if additional length is requirement F100EX6M 6m extension cable can also be used (sold separately) Specs: Compatible With: Q200, F200PRO, F790, T700 and X800 Dash Cam Models and MULTMOD Multiplexer Module Resolution: FHD (1920x1080) 30FPS Image Sensor: 2.12M Pixel CMOS Viewing Angle: Approx. 126 Degree (Diagonal) IP Rating: IP68 Cable Length: 4.4M (Total), F100EX6M 6m extension cable can also be used (sold separately). Temperature Range: Operating: -10C to 60C Storage: -20C to 70C Dimensions: 29W x 45D x 26H mm Important Information: The camera features a loop system, it is set as left side default and can be changed to right side by simply cutting the white loop on the cable during installation.
