Grab yourself a piece of art from the start. This is a print, that you can apply yourself at home. But first here's what to do and what not to do. And before you think you can't do it, of course you can. I'm only a text away if you think you've messed up! All you need is an iron. Please don't let the iron touch any part of the print. It will literally shrivel and maybe fall off or maybe just stay attached and shrivel the fabric too. To stop this from happening, we use a heat proof sheet or greaseproof paper. Step 1: Preheat iron. We're looking for 140 degrees for 60 seconds. So, if you have settings, a mid setting will be fine. Step 2: Place the print where you'd like it to be on your item of clothing. Check it's level with a ruler or if you've got a good eye, then that'll be fine too. Step 3: Iplace your greaseproof paper / or heat proof paper over the top of your print, gently. Prints can slightly move, so peek and double check or sometimes you can see through the heat proof paper well enough. Step 4: IMPORTANT. Do NOT do circular motions. You'll crease and drag the print. Just hold the iron over the print with light pressure for 60 seconds. If your print is bigger than your iron, do it in sections. Don't worry too much about overlapping sections. Step 5: Remove the heat proof sheet. Wait for it to cool down and gently peel the white sheet from one corner. Go very slowly at the start, and as you do it, check that the print isn't lifting away from the item of clothing. If it is, stop lifting and repeat Step 4. Step 6: Place the heatproof sheet back over the print (make sure theres no bits peaking out!!). Step 7: Repeat Step 4 for 30- 40 seconds. Tada! All done ❤️ I would love to see what you've made, you can either send it to me directly or tag me on social media. *Please don't use your favourite items for a first attempt! I cannot except any responsibility for ruined garments. Blank items work best.
