PLEASE NOTE: This factory installed upgrade/option is only available for purchase as an upgrade or with a new kiln. It cannot be ordered without ordering an L&L kiln. Vent Doubler for venting two kilns with one vent VENT TWO KILNS This accessory allows you to connect two kilns to a Vent-Sure vent system. It can be added to an existing vent system or can be ordered with a new vent. In some cases you may be able to fire two kilns at once. The Vent-Sure has enough force to vent at least 20 cubic feet of kiln. That means, for instance, that two e28T-3 kilns could be vented while firing at the same time. The "T" duct fitting attaches to the inlet of the fan motor. There are two dampers on it to allow you to both control the flow and to shut off one or the other kiln. Flexible aluminum dryer duct goes between the ends of this "T" duct and the two fittings that attach to the kiln stands. WHAT THE OPTIONAL “VENT-DOUBLER” INCLUDES One 3" galvanized "T" duct fitting with dampers with self-drilling screws to attach it to the motor assembly One extra Collection Box with slide damper One extra 8' Flexible Aluminum Duct (one is normally included with the Vent-Sure). There are two clamps per Flexible Duct Assembly One Floor/Wall bracket. NOTE ABOUT PHOTO The product photo shows an entire installation to illustrate how the system is put together. The Vent Doubling System does not include stands or the Multi-Mounting Bracket. It only includes what is mentioned above. (Consider buying a Multi-Mounting Bracket if you need to install the system like the photograph shows). Model: M-V-VENT/DB
Related
Related