NANO4-GROUT It’s never fun having to waste your weekend cleaning all the nasty bacteria and mould build-up in your bathroom. Nano4-Grout is a nano grout sealer is a non-toxic protective coating that penetrates, seals and protects the grout especially in your bathroom and keeping it clean and healthy. Where can I apply it? Bathroom grout Kitchen grout Any grout surfaces Any natural porous stones or tiles Why choose Nano4-Grout over other products? Safer – Our odourless water-based penetrating sealer is 100% natural eco-friendly formula reducing the health risks for Australian families when compared to other products on the market. Greener – Our product is made of quartz sand also known as liquid glass. The natural ingredients are formulated with the environment in mind, therefore supporting efforts to make our planet a sustainable one. Smarter – Nano4-Grout is quick and easy to apply. Saving you many hours of scrubbing the mould in your bathroom. It’s design to reduce up to 90% of cleaning chemical usage and avoiding it from going into our water stream and harming our environment. Other features and benefits Non-toxic Invisible coating Odourless Reduce moss & fungi growth Curing time 24 – 48 hours Protection up to 5 years PRODUCTS SIZE COVERAGE EXAMPLE ITEMS TO SEAL AND PROTECT 200ml Bottle 1m2 – 7m2 1 average size bathroom grout 500ml Bottle 2.5m2 – 16m2 2 average size bathroom grout 1 Litre Bottle 5m2 – 33m2 4 average size bathroom grout or kitchen and laundry 4 Litre Bottle 20m2 – 132m2 Grout inside an average size house EASY TO APPLY STEP 1. We recommend doing a test on a small area first; allow it to cure for 24 – 48 hours to determine the desired results. STEP 2. Before you apply, make sure the surface if clean, dry and free of residues. Do not dilute Nano4-Grout with water, as it is not required. STEP 3. Pour Nano4-Grout into a clean plastic container and use a brush for the most economical application to apply on the grout as spraying may waste the liquid. Apply 2 coats (wet to wet). Apply the 2nd coat before the 1st coat dries while it’s still wet – usually within 3 – 5 minutes. Once completed, use a cloth and wipe off any excess residue off tiles. Let it dry for 24 – 48 hours before allowing contact with water. Nano4-Grout offers a long life protection of up to 5 years for new surface and when applied correctly according to instructions and maintained according to Nano4Life’s maintenance guide. However, you may need to re-apply earlier depending on the usage and for optimum results. TIPS For the best results apply generously on the surface and make sure the coatings are wet Avoid using the shower of the treated grout and use a second shower if possible to allow the treated surface to cure within the desired time frame (24 – 48 hours) Once applied in the bathroom, leave the doors and windows open for better ventilation to assist in the curing process If you’re unsure please visit www.nano4life.com.au for our application video or contact us. PRECAUTIONS – DO NOT SWALLOW Apply when surface temperature is between 5 – 30OC Avoid moisture contact with the surface after application until fully cured for 24 – 48 hours for optimum results Wear gloves and protective clothing Wash hands after application Store in a cool and dry location away from direct sunlight Keep out of reach of children PH Value 14 or above cleaner can destroy the effect Nano4-Grout does not protect against etching, wear and high water pressure 50 bar and above CHEMICAL COMPOSITION Demineralised Water (H2O) >94% Silicon Dioxide (SiO2)
