The M5NanoC6 is a compact, low-power IoT development board in the M5Stack development kit series. Powered by the ESP32-C6FH4 MCU, it supports Wi-Fi 6 (2.4GHz 802.11ax), Zigbee, Thread, and Matter wireless protocols. It features a built-in infrared LED for remote control of IoT devices and an RGB indicator for visual feedback. The ceramic antenna ensures a stable wireless connection, while the Grove port allows for seamless expansion with M5Stack ecosystem devices. Key Features of M5NanoC6 Wi-Fi 6, Zigbee, Thread, and Matter SupportThe M5NanoC6 supports 2.4GHz Wi-Fi 6 (802.11ax) and is backward compatible with 802.11b/g/n. It also integrates Zigbee, Thread, and Matter wireless protocols, providing broad connectivity options for smart home and IoT applications. Infrared LED & RGB IndicatorThe built-in infrared LED enables remote control of home appliances, while the programmable RGB indicator enhances project interactivity with visual effects. Grove Expansion Interface & M5Stack EcosystemThe Grove port supports UART, I2C, and other communication protocols, allowing developers to easily connect with M5Stack ecosystem devices and expand hardware capabilities. Stable Connectivity with Ceramic AntennaThe integrated ceramic antenna provides a strong and reliable wireless connection, optimizing signal stability in IoT applications. Compact and Low-Power DesignWith its small size and low-power consumption, the M5NanoC6 is ideal for battery-powered applications, ensuring efficient operation in smart home automation, industrial control, health monitoring, and other IoT solutions. How to Enter Download Mode for Firmware Burning Press and hold the GPIO9 button. Connect the data cable to enter download mode. With its Wi-Fi 6, Zigbee, Thread, Matter support, infrared control, Grove expansion, and compact low-power design, the M5NanoC6 is an excellent IoT development board for smart home, industrial automation, and health monitoring applications. Arduino IDE NanoC6 Arduino Demo- Button NanoC6 Arduino Demo- ir_nec NanoC6 Arduino Demo- led NanoC6 Arduino Demo- rgb_led Includes 1x M5NanoC6 Applications Intelligent housing system Industrial control system Environmental monitoring system Agricultural iot systems Medical treatment Consumer electronic Service robot Specification Resources Parameters SoC ESP32-C6FH4@RISC-V 160MHz，4M Flash， Wi-Fi 6，Zigbee 3.0，Thread 1.3, Matter，CDC WIFI protocol 2.4GHz Wi-Fi 6 protocol (802.11ax) and backward compatible with 802.11b /g/n RGB WS2812 IR remote control parameters The infrared emission distance of < 0° is 632CMThe infrared emission distance of < 45° is 83CMThe infrared emission distance of < 90° is 29CM Grove outputs maximum current DC 5V@600mA(Output capacity depends on USB power supply) Standby current （Deep Sleep Mode) Type-C Power supply DC [email protected] power supply DC 5V@50uA Standby current (ULP Mode) Type-C Power supply DC 5V@252uAGrove power supply DC [email protected] Operating current In WIFI mode: DC [email protected] WI-FI stretch test (antenna back up, back alignment test) 54.9m Operating temperature 0-40°C Product Size 23.5*12*9.5mm Package Size 110*81*11mm Product Weight 2.5g Package Weight 11.2g
