** Orders with large pieces of furniture are subject to an extra shipping cost outside of Denmark **NB! This conversion kit only fits the new version of the Nature Baby Bed 2.0 which has no visible screws.If you have the old version of the Nature Baby Bed which has visible screws, you need the "Nature Conversion Kit".DESCRIPTIONNB! This is the conversion kit that fits only the Nature Baby Bed 2.0 which has no visible screws. By using this conversion kit, the Nature Baby Bed converts to a junior bed. This way, the child can use the bed for even more years. The design is simple with rounded details, and the solid oak wood warms up the expression even more. The bed complies with applicable safety standards. NB! Wood is a natural material, and the color will therefore vary from item to item.DIMENSIONSInner dimensions: 160 x 68 cmOuter dimensions: 164,5 x 72,5 cmQUALITYSolid oak (bed base in birch veneer)Clear matte lacquerSAFETYThe bed complies with BS 8509:2008+A1:2011.The lacquer complies with EN 71-3:2019 + A1:2021.CARE INSTRUCTIONS Wipe with a clean damp cloth. Excess water must be wiped off. Never use harsh chemicals.Wood is a natural material, and the color will therefore vary from item to item. The color of the wood can change when the bed is exposed to sunlight.Solid wood furniture should not be placed in rooms where the humidity fluctuates a lot, as this may cause the wood to warp or crack or that the joints will loosen. Keep wooden furniture away from direct sources of heat and cold respectively.MATTRESSNot included.DELIVERYUnassembled.WARNING• Not suitable for children under 4 years. • Never place the bed close to an open fire or other sources of strong heat, such as electric bar fires, gas fires, etc. due to the risk of fire. • Never place the bed close to another product which could provide a foothold or present a danger of suffocation or strangulation, e.g., strings, blind/curtain, cords, etc. • Children are likely to play, bounce, jump and climb on beds, therefore the child’s bed should not be placed close to other furniture or windows. • The bed should be placed either tight to any wall or have a gap of 300 mm between the wall and the side of the bed. • Do not use the bed if any part is broken, torn, or missing and use only spare parts approved by We Are Bitte. • Never use a mattress smaller than 680 x 1600 mm and make sure that the mattress has rounded corners like the original mattress from We Are Bitte. Other mattresses may cause gaps between the mattress and the bed in which the child can become trapped. • The bed is not designed to be dismantled for storage or transportation. • After assembly, all fittings and screws must always be tightened properly. A poor assembly may cause loose parts and loose screws which may cause danger to the child. • All fittings and screws must be checked regularly and retightened as necessary. DOWNLOADAssembly instructions
