A tiny yet versatile USB UART interface The Nautilus is a USB UART, allowing easy interfacing of most "serial port"-style electronics. On one side, a micro-USB connector allows attaching a cable to a host computer. On the other side, a six-pin female header exposes the TX (transmit) & RX (receive) lines, as well as some ground, a 3.3V reference and VUSB (5V). Note: USB cable and jumper wires not included. Selectable operation voltage So many devices out there to talk to, yet so many of them don't agree on whether a serial interface should be at 3.3V or 5V. Do you carry a level shifter around just to solve this issue? The Nautilus includes a simple switch on the side, clearly labeled and easily accessible, to select between 3.3V or 5V operation. No more level-shifting nonsense to get a quick shell on a target board - just plug in the Nautilus and select the appropriate voltage. Dual reference outputs In addition to the TX & RX lines, the Nautilus also features two ground pins as well as dual 3.3V & VUSB (5V) reference outputs. These come in handy whenever you need to pull some additional pins high or low on the target. No drivers required - use anywhere Built around the famous FT232 chip, the Nautilus is automatically handled by all modern operating systems. This mean you never have to worry about drivers, even when using the Nautilus from someone else's computer. IMPORTANT NOTE: THIS IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. IF YOU ARE PURCHASING THIS, IT IS ASSUMED YOU KNOW HOW TO USE IT AND WHAT YOU ARE DOING. THAT BEING SAID, YOU ARE REQUIRED TO OBEY THE LAW AND ARE PROHIBITED FROM USING RINGTAIL PRODUCTS FOR ANYTHING OTHER THAN LEGITIMATE PURPOSES. RINGTAIL WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGE CAUSED AS A RESULT OF USING OUR PRODUCTS.
Related
Related
Related
Related