ne4400 w/ 4-ch mic in + 4-ch AES out. The ne4400MS from Ashly is a network-enabled DSP processor that offers easy setup and control using standard 10/100 Ethernet protocol and Protea ne software. The unit features four analog inputs and four analog outputs, along with four microphone inputs with phantom power and four channels of AES3 output, the later filling two of the four option bays that provide expanded functionality. The DSP signal processing library is extensive and utilizes multiple SHARC 32-bit processors with sample rates of either 48 or 96 kHz. Processing blocks include a 4 x 4 matrix mixer, a full array of graphic, parametric and all-pass equalization, crossover filters including 8th-order Butterworth, Bessel, Linkwitz-Riley and notched Linkwitz-Riley. The Protea Software Suite also includes an automatic feedback suppressor, gain sharing automatic microphone mixing, ambient noise sensing and level adjustment, autolevelers, compressors, matrix duckers, limiters, frequency-keyed noise gates, signal delay up to 1365 ms on every channel and a choice of sinewave, pink or white noise generators. All programming is accomplished using standard 10/100 Ethernet or RS-232 protocol and Protea ne software on a PC platform. Hot-plug software control allows for plugging any function into any channel block, even when running live audio with recompiling necessary. Automatic DHCP network IP configuration reduces network set up time. Multi-level software security with password access provides a tamper-proof audio system. Features Audio processor and controller for networked systems Easy and intuitive user interface Four microphone inputs with +48V phantom power Microphone preamp gain of 0, +20, +40, or +60 dB Four-channel AES3 digital output 10/100 Ethernet and RS-232 computer interface standard Extensive DSP 32-bit SHARC DSPs 24-bit A/D and D/A conversion 48 and 96 kHz sample rates Hot-plug software control Automatic DHCP network IP configuration Butterworth, Bessel, Linkwitz-Riley, and Notched-Linkwitz-Riley filters FIR filter capability Advanced automatic feedback suppression Wordclock input and output Euroblock connectors for audio, preset recall, DC remote level control and data in/out Remote controls for level, logic I/O and programmable functions Third-party control friendly, input and output metering, multi-level security cTUVus, CE, FCC, RoHS safety compliance CobraNet, Dante, and microphone input options Protēa DSP Functions and Processors Input source selection Brick wall limiter Compressor Autoleveler controls Ambient noise compensation (output only) Ducking (high/low priority, trigger, filibuster, ducked program) Gate Advanced gate controls Gain EQ: 31-band Parametric 2, 4, 6, or 10 band High/Low Shelf 6/12 dB per octave All-Pass Variable Q HP/LP Notch/Band-Pass Feedback Suppressor (inputs only and 48 kHz sampling rate) Crossover: 2-, 3-, 4-way crossover and High-Pass/Low-Pass filters Delay: Input time, distance, and temperature @ 48 kHz sampling rate Input time, distance, and temperature @ 96 kHz sampling rate Audio metering tool Signal Generator Tool (pink noise, white noise, sine wave) Matrix mixer Processors Specs Frequency Response 20 Hz to 20 kHz,+/-0.1 dB, A>D+/-0.25 dB, D>A+/-0.25 dB, A>A Dynamic Range 20 Hz to 20 kHz (unweighted)>115 dB, A>D>114 dB, D>A>114 dB, A>A THD + N 1 kHz, +20 dBu analog (-1.0 dBFS digital)>0.001%, A>D>0.002%, D>A>0.002%, A>A>0.00001%, D>D Latency @48 kHz1.42 ms, A>D0.90 ms, D>A2.21 ms, A>A0.10 ms, D>D@96 kHz0.71 ms, A>D0.45 ms, D>A1.11 ms, A>A0.05 ms, D>D Wordclock Input/Output Type: 75 Ω BNCLock Range: 48 kHz +/- 4%, 96 kHz +/- 4%Input Impedance: Selectable 75 Ω or high impedanceInput Voltage Range: 1.0 to 7.0 VppOutput Impedance: 75 ΩOutput Level: 5.0 Vpp nominal, unterminated Master Clock SourcesAudio networkWordclockAES3Internal crystal clockModesPrioritized auto switching Manual Inputs Analog Line/MicrophoneInput Type: Active balanced EuroblockInput Impedance: 20 kΩMaximum Input Level: +20 dB Outputs AnalogServo-Balanced EuroblockOutput Impedance: 20 ΩMaximum Output Level: +20 dBuAES3 Transformer Balanced Male XLROutput Impedance: 110 ΩMaximum Output Level: 5.0 Vpp Other Connectors 10/100 Ethernet port RS-232 portRemote level control Logic I/O Data in/out portsOn/Off switch Environmental 40 to 120°F (4 to 49°C) non-condensing Power Requirements 90~240V AC, 50/60 Hz 70 W maximum System Requirements Computer running under Windows 8, 7, Vista, XP (32- and 64-bit systems)
