Neutral foam shampoo has an above average foaminess on the market: its foam generated with the foaming technique creates a compact film, which remains adhered to the surfaces. It has an intense and homogeneous lubricating action and encapsulates dirt, facilitating removal during the subsequent rinsing phase without creating halos or streaks. The great emollient capacities detach all the dirt present, acting in a delicate way. Its WAX SAFE technology makes it suitable for frequent use because it respects the protection beneath, freeing it from surface dirt that could impair its performance. Used when washing by hand with a bucket, “Neutral Foam Shampoo” boasts excellent economy of use: it can be diluted up to 1:400 (1 part product to 400 parts water) making it ideal for frequent or maintenance washing. • 2in1 formula, with neutral pH, ideal for frequent washing: ❶ Hand wash with glove: creates a soft, compact and lubricated foaming film that makes it safe on any type of surface, allowing you to wash the car without the risk of creating swirls or micro-scratches. It respects any type of previously applied protection and has excellent economy thanks to the high dilution ratios up to 1:400 (1 part of product and 400 of water). ❷ Pre-wash with Foam Gun: great emollient capacity, creates an adhesive foam above the market average. Its intense and homogeneous active foam encapsulates dirt, facilitating removal during the following rinsing phase without creating halos or streaks. • Bubble Gum scent. Make sure that the surfaces of the vehicle are not hot and that the car is in the shade, avoiding direct sunlight. The first step is always the prewash. In the case of heavily embedded dirt, we recommend a prewash with our "Foam Gun Prewash" to remove coarse dirt on the surface to prevent scratches and facilitate the next step of hand washing. We recommend using the two-bucket washing method (one with the shampoo/water solution and the other with clean water only) together with a microfiber mitt such as our "Double Face" or a sponge/pad such as our "Microfiber Pad". For washing rims and tyres, also use an additional sponge or mitt. Using the bucket screen helps to remove dirt and impurities from the mitt or sponge and deposit them at the bottom of the bucket. We recommend washing your car every one or two weeks ❶ Pre-wash with Foam Gun: dispense the product previously diluted 1:10 (one part of the product and 10 of water) over the entire vehicle. Wait for the product to act for about 4 minutes until the foam gets thinner, without letting it dry on the bodywork. Rinse the vehicle with high pressure starting from top to bottom, then proceed with manual washing with a bucket. ❷ Hand wash with bucket: dilute the product 1:400 (3 caps of the product in 10L of water). Use a second bucket with clean water for rinsing the glove. Work starting from the top and always with the wet vehicle, with a soft sponge or a microfiber glove. Wash the entire vehicle without letting the shampoo dry on the bodywork. Finally rinse and proceed with drying phase using our “Super Dryer” microfiber cloth.
