NewBeeDrone Nectar Injector Smart Charger Introducing the NewBeeDrone Nectar Injector Smart Charger, the ultimate charging solution for FPV enthusiasts and drone racers. Designed with efficiency and convenience in mind, this smart charger can handle multiple battery types, making it an essential tool for your drone setup. The Nectar Injector features advanced technology that optimizes charging for 1S LiPo batteries, ensuring your packs are charged quickly and safely. Its intelligent management system monitors the charging process, providing real-time data and preventing overcharging, which enhances battery lifespan and performance. Compact and portable, the Nectar Injector Smart Charger is perfect for on-the-go charging at the flying field or in your workshop. The user-friendly interface allows for easy operation, and its sleek design ensures it fits seamlessly into your existing gear. With the NewBeeDrone Nectar Injector Smart Charger, you can focus more on flying and less on waiting for your batteries to charge. Give dead batteries new life! After batteries sit for long periods of time the voltage will naturally drop down, or sometimes you might run them too long after a flight, and not charge them back in time. Once the cell's voltage is low enough, it will no longer be visible to most chargers to accept a new charge and will show no voltage. With trickle charge mode, it can wake up deep discharged batteries and automatically enter the constant current charge mode after activation. Stop throwing dead batteries away, and start using them again! (Resurrection is dependent on cell health, some batteries may be too far gone) 2-Way Charging! Because some customers use non-HV, and others like using HV batteries, our charger supports both! Each side of the charger has a switch, which can be switched to the HV mode, which will charge 4.35V LiHV batteries. The other position is non-HV mode, which will charge 4.2V batteries.NOTE: Some USB cables may reduce input voltage to charger that may cause dim light and reduced charging speed, please use included charging cable for maximum and proper charging speed. If the supplied input voltage is 4.6v or less, the charger will not function properly. Charger must be unplugged and replugged whenever switching from HV to non-HV charging. When removing a battery from the charger that fits tight, gently wiggle side to side from the plastic base of the battery, pulling or yanking from the end of the battery can result in battery connector damage and is not covered under warranty. Specifications: 5v Micro USB Input voltage (voltage over 6.5v will damage board) 2A charging total output (0.5a per PH2.0 Connector) LED charge indicators Trickle charge Low power sleep mode Includes: Carrying Case Nitro Nectar Smart Charger Micro USB Cable If you have issues with the batteries stuck in the charger, please watch the following video to learn how to safely remove the batteries without breaking them:
