Newform Fluted Round Vessel Concrete Basin The Newform handcrafted Fluted Round Concrete Vessel is available in all 18 colours. Featured colour is MIST. All New Form Concreting Basins are Custom made; each piece is made to order. The time to create your basins is approximately 2-3 weeks. Waste size we recommend buying a universal 32-40mm. Care and Maintenance of your Handcrafted Concrete Basin. This is one of a kind, handcrafted and unique concrete design is made to last, and with a bit of care and love you will have this forever. Made from only the best products, this concrete has been sealed, waxed and tested before leaving our factory to ensure its excellent quality in your bathroom. Only a little common sense and care is needed in caring for your New Form Concreting concrete, these as follows: • Remembering that our concrete is both water tolerant and stain resistant but not water and stain proof. Ensuring you wipe and clean as you use is essential to the ongoing care of your beautiful basin. Over time your basin will gain character, as it is a natural ageing product.• Wipe as you go, using a soft damp cloth to wipe it down.• If you encounter stubborn stains, use a mild non-abrasive cleaner. • Avoid exposure to products with high PH levels such as jiff and bleach, avoid exposure to paint strippers, nail polish remover and hair dye. Rinse immediately to neutralise the effect, and then follow usual cleaning procedure using a PH neutral cleaning agent.• Avoid exposure to high impact, especially on the edges. Stubborn Stains and Dried Spills: • New Form Concreting high-end sealers provide great resistance to most common used items used in the bathroom, but please note: if left for an extended period, stains may occur, so ensure you wipe down as you go. A wet cloth is recommended for any stubborn stains. If needed use a non-acidic and non-abrasive cleaner and rinse well with water. Avoid forceful scrubbing as this may result in a loss of shine and remove the protective sealer.• Do NOT leave your basin - toothpaste, mouthwash, hair dye, sunscreen, oil-based products or makeup.• DO NOT fill your basins with boiling water and leave for extended periods of time. Your basin is designed for washing not soaking.• Direct Sunlight: Our concrete basins are suitable product to be used outdoors, our concrete colours are all UV resistant, and the colour is throughout the entire concrete piece.• Heat Resistance: Placing hot items such as a hair straightener directly onto your polished concrete basin is not recommended. Although it is heat resistant, excessive localised heat may result in damage to the concrete sealer or may lead to a thermal shock.• Scratches, Cracks and Edge Chipping: Like all materials, over time the sealer on concrete basins may develop scratches and abrasive marks. To minimise this, follow the waxing procedure to ensure your basin looks beautiful.• As with all basins, concrete is susceptible to chipping and cracking with improper use. Avoid impact on edges and the surface with hard objects. Areas around cutouts are weak points and can form small hairline cracks. The damage is aesthetic and not structural. If structural cracks occur, the product will be replaced. Please note, hairline cracks are not common but may occur. Please ensure you follow the installation process correctly. Remember to wax your basin once a month to keep it looking beautiful! As a mild and gentle cleaner, we like to use a damp microfibre, combined with dishwashing liquid - 2 Tablespoons to a litre of water, this works as a great general cleaner! Ongoing Maintenance: Your beautiful basin comes already sealed and waxed. This waxing process should be don ever month to ensure the protection of the sealer and aid against any staining. New Form Concreting – Warranty Details: • New Form Concreting warrants our Concrete Basins for 12 months from the original date of purchase. We warrant that the product will be free from manufacturing defects. Please make sure prior to installation, that you read, understand and follow our installation guidelines AND the Care and Maintenance Instructions.• New Form Concreting is not responsible for labour or installation charges, removal and/or disposal charges of existing basins or any other expenses associated with a defective product. New Form Concreting's sole responsibility is replacement, exchange, or repair of a defective product. Exclusions of this warranty are as follows: • Use of the Basin for any commercial purpose.• Edge chipping, surface damage caused by wear and tear, hairline cracking or• Discolouration due to the product being subjected to high heat, or damage caused by improper use or abuse including damage from mishandling or misuse • Exposure to ultra violet light .• Damage from physical or chemical abuse and damage caused by cleaning with abrasive substances.• Scratches or stains. If any chemicals are left on for an extended period of time on our Basins they will stain.• Any chemical damage including but not limited to stains from hair dye, moisturizer, makeup, oils, toothpaste, mouthwash. If these items are left on for an extended period, the basin may stain. Advised to wash down as you use.• Damage to the product because is has been fabricated or installed in an improper manner or contrary to any specifications outlined by New Form Concreting.• The altering of any factory-applied finish.• Additional modifications such as plumbing, electrical, tile, cabinets etc that may be necessary to repair or replace the New Form Concreting product covered under this warranty.• Chipping or pinholes occurring during fabrication or through ongoing use• Hairline cracking around cut-outs during or after installation.• Basins that have been filled with extremely hot water and left for an extended period of time.• Routine maintenance and minor conditions such as stains, revealing of pinholes, and water spots that are function of proper care and maintenance and which may be avoided by following the techniques specified in the Care and Maintenance Guide.• This warranty is not transferrable during the warranty period to any subsequent owner of the residence in which the surface product was originally installed.• The warranty does not apply where the defect is trivial or insubstantial and where the product is installed with known or visible manufacturing 'characteristics' at time of installation, including but not limited to colour variance or flatness deviation beyond reason.• Any claim under the warranty will not be recognised or accepted and the warranty does not apply if:• The claim is not supported by proof of the purchase of the product from New Form Concreting within 12 months.• The claim is not made within a reasonable period after the defecting product would have become apparent to a reasonable person.• The product alleged to be defective is not made available for inspection and testing by New Form Concreting or its authorised representatives or consultants.• Special Note: Concrete basins are poured in moulds, therefore when they are removed from the mould, they will have some pinholes or bubbles along with other woids, "characted markings", and discolouration. These are not considered manufacturing defects; rather it is a reflection of the ongoing patina of the concrete product.• Please note: Basins purchased for commercial use will not be valid under our warranty.
