E-flite Night Timber X Evolution 1.2M BNF Basic Electric Airplane (1200mm) w/AS3X+ & SAFE Select Night Ready Extreme RC Airplane The E-flite Night Timber X Evolution 1.2m combines extreme Short Take Off and Landing (STOL) with wild 3D performance. Equipped with bright LED lights, this plane is ready to dominate the skies, day or night. This Bind-N-Fly variant requires only a battery, charger, and transmitter to get in the air. About the Night Timber X Flight Performance The Night Timber X Evolution 1.2m features a wing design with a shortened span plus much larger ailerons and flaps, along with an enlarged elevator and rudder, compared to the Timber 1.5m models. Double-beveled hinge lines make it possible to deflect every control surface, including the flaps that can travel in both directions, to high angles for outstanding control and eXtreme 3D aerobatic capability. Or on low rates, the controls can be smooth and docile so you can fly as mild or as wild as you'd like! LED's Embedded throughout the airframe are factory-installed LED lights that make it possible to fly all day AND all night, too! They're conveniently powered by the 3S or 4S 2200–3200mAh flight battery and can easily be disconnected when flying in daylight conditions. Plus, just like other Timbers, the Night Timber X Evolution 1.2m is also equipped with realistic-looking LED landing, navigation and strobe lights. Power Plant The factory-installed brushless power system features a Spektrum Avian 70-amp Smart Lite ESC along with a specially-tuned motor and prop that deliver an abundance of thrust with a 3S LiPo battery or eXtra power and unlimited vertical performance with a 4S battery without the need for any modifications or upgrades. Plus, the more convenient top hatch and larger battery compartment make it easier to fit batteries from 3S 2200mAh to 4S 3200mAh to achieve a wide variety of performance and flight times. Features: Top-mounted hatch, heavy duty landing gear springs, and more for added convenience, durability, and capabilities Incredible Short Takeoff and Landing (STOL) plus sport and 3D aerobatic flight capabilities Functional flaps that can travel both ways for optional use as full-span ailerons High-power 3S and 4S compatible outrunner motor with a stronger mounting design for more reliable performance Larger and more convenient top hatch to easily fit 3S 2200mAh to 4S 3200mAh batteries Spektrum AR631+ receiver with fly-by range telemetry and industry-leading DSMX technology Functional and factory-installed LED landing, navigation and strobe lights Lightweight yet durable composite-reinforced EPO construction Bolt-on, two-piece wing with composite wing joiner Fast and easy assembly – no glue required Includes: (1) E-flite Night Timber X Evolution 1.2m with: (6) Spektrum Metal-Geared Servos (installed) (1) Spektrum Brushless Outrunner Motor (installed) (1) Spektrum Avian 70-Amp Smart Lite Brushless ESC (installed) (1) Spektrum AR631+ Receiver with AS3X+ and SAFE Select (installed) (1) Product Manual Needed To Complete: (1) Full-range 5–7+ channel Spektrum DSMX®/DSM2® compatible transmitter (1) 3S 11.1V or (1) 4S 14.8V 2200–3200mAh LiPo with EC3 or IC3 Connector (1) Compatible LiPo charger Specifications: Length 41.5in (1054mm) Wingspan 47.5in (1206mm) Weight 63.9oz (1810g) Material EPO Power Source Electric Input Voltage 3-4S LiPo (11.1-14.8V) Motor Brushless Connector IC3 Skill Level 2 - Some Experience Required Assembly Level BNF* *Tech Note: Bind-&-Fly aircraft come equipped with all on-board electronics and still require a compatible transmitter for operation. Please check the Needed to Complete to make sure you have everything you need to get up in the air!
