The Nikon WR-10 Wireless Remote Controller Set comes with the following: WR-T10 Wireless Remote Controller WR-R10 Wireless Remote Transceiver WR-A10 Wireless Remote Adapter The WR-T10/WR-R10 Wireless Remote Controller units use radio frequencies to communicate; by pairing together a WR-T10 and one or more WR-R10 units. The WR-A10 WR Adapter is designed to work with the WR-R10 Wireless Remote Controller (transceiver), allowing it to be connected to select Nikon D-SLRs with a 10-pin connector, to wirelessly control the shutter release. D-SLRs without a 10-pin connector do not need the adapter. Photographers can use the WR-T10 to simultaneously release the shutter on multiple Nikon D-SLR cameras that have a WR-R10 unit attached and have been paired with the WR-T10. Three radio frequency channels are available for use, to prevent interference when multiple pairings or photographers are shooting in one location. Useful for triggering the shutter remotely when using slower shutter speeds to prevent camera movement. Range (line of sight) from WR-R10 (used with the WR-A10 WR adapter on select D-SLRs, and acting as a master unit) to WR-R10s is 164 feet (50 meters). One WR-T10 unit can be paired with an unlimited number of cameras with a WR-R10 unit attached. When the WR-R10 is used along with the WR-A10 WR Adapter to connect to select Nikon Digital Cameras with a 10-pin connector, one camera can be designated as “master” and control the shutter release of up to 64 WR-R10 transceiver units. Range (line of sight) from the WR-T10 to WR-R10s is 66 feet (20 meters). The Nikon WR-10 Remote Controller Set is compatible with the following Nikon cameras: Using a WR-A10 (10-pin) Adapter: D5 D4/D4S D3/D3X/D3S D2Xs/D2Hs D810/D810A D800/D800E D700 D500 D300/D300s D200 These cameras have an accessory terminal and do not use the WR-A10 Adapter: Df D750 D610 D600 D7200 D7100 D7000 D5500 D5300 D5200 D5100 D5000 D3300 D3200 D3100 D90 COOLPIX A COOLPIX P7800 COOLPIX P7700 F100 SLR
