NIKRO APW15150 Poly-Tank Compressed-Air Wet/Dry HEPA Vacuum for Corrosive LiquidsThe NIKRO APW15150 pairs a corrosion-resistant polyethylene tank with wet and dry pickup out of the box. It runs on shop compressed air with no electric motor, pulling 90 CFM and 150 inches of static lift through a 99.97% at 0.3 micron HEPA filter. The poly tank is the reason to pick it: it recovers corrosive liquids and chemical residue that would rust a steel drum.NIKRO APW15150 Corrosion-Resistant Wet/Dry Pickup Polyethylene tank with wet/dry pickup — recovers corrosive liquids and residue that would rust painted steel Wet and dry standard — handles liquids and dry debris without a conversion kit Runs on shop compressed air — no electric motor to overheat, the reason crews choose a pneumatic vacuum 90 CFM at 150" static lift — pulls both packed debris and liquid 99.97% at 0.3 micron HEPA filter — holds lead, mold, and abatement particulate on the dry side Needs 20 CFM at 100 PSI — runs off a standard shop compressor through a 1/2" air hose APW15150 Applications and EnvironmentsWhen a job mixes corrosive liquid with dry debris, the APW15150 covers both without a kit swap and without corroding. Abatement and restoration crews use it for chemical spill recovery, flood cleanup, and remediation debris where the residue would attack a steel tank. Running on compressed air with no electric motor, it fits crews that power off shop air. It draws 20 CFM at 100 PSI, so a shop compressor powers it.Specifications Tank Size 15 Gal. Tank Construction Polyethylene Static Lift 150" Vacuum Airflow (CFM) 90 Dry Pickup Yes Wet Pickup Yes Filtration 99.97% at 0.3 micron Compressed Air Required (CFM) 20 P.S.I. 100 Air Hose ID 1/2"
