[shortdesc] Expansion module Gigabit Ethernet x 8 For Cisco 4451-X [/shortdesc] [specifications] IEEE protocols Gigabit Ethernet: IEEE 802.3 and 10BASE-TGigabit Ethernet: IEEE 802.3u, 100BASE-TX, and 1000BASE-TXIEEE 802.1d Spanning Tree ProtocolIEEE 802.1p CoS for Traffic PrioritizationIEEE 802.1q VLANIEEE 802.1X SecurityIEEE 802.3x Full-DuplexIEEE 802.3af Power over Gigabit Ethernet Standard RFC RFC 2284, PPP Extensible Authentication Protocol (EAP) MIBs RFC 1213IF MIBRFC 2037 ENTITY MIBCISCO-CDP-MIBCISCO-IMAGE-MIBCISCO-FLASH-MIBOLD-CISCO-CHASSIS-MIBCISCO-VTP-MIBCISCO-HSRP-MIBOLD-CISCO-TS-MIBCISCO-ENTITY-ASSET-MIBCISCO-ENTITY-FRU-CONTROL-MIBBRIDGE MIB (RFC 1493)CISCO-VLAN-MEMBERSHIP-MIBCISCO-VLAN-IFINDEX-RELATIONSHIP-MIBRMON1-MIBPIM-MIBCISCO-STP-EXTENSIONS-MIBOSPF MIB (RFC 1253)IPMROUTE-MIBCISCO-MEMORY-POOL-MIBETHER-LIKE-MIB (RFC 1643)CISCO-ENTITY-FRU-CONTROL-MIB.myCISCO-RTTMON-MIBCISCO-PROCESS-MIBCISCO-COPS-CLIENT-MIB Manageability SNMP and Telnet interface support delivers comprehensive in-band management, and a CLI management console provides detailed out-of-band management.An embedded RMON software agent supports four RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis.A SPAN port can mirror traffic from one or many ports to another port for monitoring all eight RMON groups with an RMON probe or network analyzer.Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading from a centralized location.Two LEDs per port provide a convenient visual indication of the port link and PoE status.Crash information support enables a switch to generate a crash file for improved troubleshooting.Show-interface capabilities provide information about the configuration capabilities of any interface. Connectors and cabling 10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted pair (UTP) cabling100BASE-TX ports: RJ-45 connectors; two-pair Category 5 UTP cabling1000BASE-TX ports: RJ-45 connectors; two-pair Category 5e and Category 6 UTP cabling LED indicators Link status LED: One LED per port for indicating link statusPoE LED: One LED per port system for PoE status indication Internal power supply Optional PoE system power supply available for all Cisco 4000 Series routers Internal redundant power supply For the Cisco 4431 and 4451 routers only DC power support DC system power input available on the Cisco 4351, 4431, and 4451 routersPoE option not available with DC system power input Software support Minimum Cisco IOS-XE Software Release 3.15 for Cisco 4000 Series routers: IP Base License of the Universal image Operating temperature 32 to 104F (0 to 40C) Operating humidity 10 to 90 percent, noncondensing Nonoperating temperature -4 to 149F (-20 to 65C) Operating altitude 15,000 ft (4,570m) Regulatory compliance, safety, and EMC When installed in a Cisco 4000 Series router, the Cisco Gigabit Ethernet LAN Switch NIM meets the standards (regulatory compliance, safety, and EMC) of the router itself. Refer to the data sheets for the Cisco 4000 Series routers for more details. [/specifications] Cisco NIM-ES2-8 Expansion Module The Cisco NIM-ES2-8 8-Port Layer 2 Gigabit EtherSwitch Network Interface Modules connect Cisco IP phones, Cisco wireless access point workstations, and other network devices such as video devices, routers, switches, and other network components. Key Features: Single-wide NIM form factor For Cisco ISR 4000 Series Inline power on IP phones –30 V power The tabs contain the Cisco NIM-ES2-8 datasheet with all the specifics you need.
Related
Related
Related
Related