GodHand "Normal Nipper" has undergone a model change! Ideal for plastic kit gate cuts and runner cuts! "Ordinary nippers" are "universal nippers" that do not have special specs and can be used normally by anyone in any situation. To support the ultimate nipper. It is recommended for the first nipper debut. Safely cut various materials! The simple blade structure has a rough finish on the cross-section, but the strength of the blade is high by that amount, including plastic. Easily cuts various materials. The "ordinary nippers" have sharpness grade 3 (in-house standards), so you can see whitening compared to the grade 5 "ultimate nippers". Instead, compared to the ultra-thin single-edged ultimate nipper, there is no need to worry about the blade breaking, so even beginners can use it with confidence. The degree of opening of the blade does not depend on the spring! New spring structure "packing spring" adopted! When you grip it to a certain position, the stopper is released and you can open it fully. Overall length: about 130mm Grip thickness: about 12mm (thickest part) Weight: about 55g Material: Kobe Steel (JAPAN) special tool steel Blade hardness: HRC45-55 Cutting capacity: Plastic φ3mm or less (PS, PP, ABS, PE resin/metal cutting is not possible) Clear material runners are also supported! Notes It is possible to cut copper/aluminum wire 1mm and stranded wire 2mm due to its structure, but if it is cut, it will not be covered by the warranty. For safety, please wear protective glasses and gloves. There is a risk that the cut object may fly. Make sure that there are no people around and that there are no fragile objects before starting work. Do not pry things with a knife or touch them directly. Do not apply a load exceeding the cutting capacity. Hard wires such as metal wires cannot be used. Apply oil to the shaft and cutting edge to prevent rust. Keep the blade closed and out of reach of small children.
