Ensure safe and compliant egress with a Photoluminescent “No Exit” sign. Required in NYC high-rise buildings, this glow-in-the-dark sign prevents confusion during emergencies by clearly marking non-exit paths. Designed to meet NYC Building Code requirements for visibility in low-light and blackout conditions. UL 1994 Listed Red Lettering on Photoluminescent Background. Dimensions: 5" x 5" Materials: .03125in Aluminum w/ Self-Adhesive Foam Back What This Sign is For: A Photoluminescent “No Exit” sign is used to clearly identify doors, corridors, or pathways that do not lead to an exit, preventing confusion during an emergency evacuation. These signs are especially critical in low-visibility conditions, where occupants may otherwise attempt to exit through unsafe or non-compliant routes. Legal Requirement Explained: This sign is required under the NYC Building Code §1025 (Photoluminescent Exit Path Markings) and related egress safety provisions.The law mandates that buildings—particularly high-rise structures—install photoluminescent signage to guide occupants safely toward exits and clearly mark non-exit paths. “No Exit” signage is essential to ensure that occupants do not mistakenly enter dead-end corridors or non-egress doors during an emergency. Who is Required to Post This Sign: - High-rise buildings (generally 75 feet or taller)- Commercial office buildings- Residential buildings with shared corridors- Hotels and mixed-use buildings- Any structure required to have photoluminescent exit path markings Where We Recommend This Sign Be Posted: - On or adjacent to doors that could be mistaken for exits but are not- At dead-end corridors or non-egress pathways- Along egress routes where clarification is needed to direct occupants away from incorrect paths- In locations where occupants might reasonably assume an exit exists Unacceptable Locations to Post This Sign: - On doors that are actual exits (mislabeling creates a violation)- In areas where the sign is not visible during egress- Behind obstructions such as equipment, décor, or storage- In locations that create confusion or contradict other exit signage- In well-lit-only positions where photoluminescent functionality is compromised (must be able to charge from ambient light) Recommended Height / Installation Requirements: - Installed at low-level height (typically 12”–18” above finished floor) in accordance with NYC photoluminescent egress requirements- Must be placed within the line of sight along the egress path- Requires continuous exposure to ambient lighting to maintain glow-in-the-dark functionality- Must be durable, permanent, and clearly legible in darkness- Should not be installed in areas where it can be easily damaged or worn down Disclaimer: This information is provided for general guidance based on commonly referenced NYC Building Code and fire safety standards. Requirements may vary depending on building type, occupancy classification, and specific project conditions. Always consult the NYC Department of Buildings (DOB), FDNY, or a licensed design professional to confirm compliance for your specific application.
