No-Mar Re-Usable Brass Wheel Weights Balanced wheels make a huge difference for your dualsport or adventure bike. No-Mar Wheel Weights are manufactured in the USA using USA produced brass. No crimping or double sided tape stuck to your rims. The brass can also be painted or coated to match if needed. These weights will work on most Dualsport and Adventure motorcycles available on the market today. See the SPECS below for more detailed information. Each weight has a stainless steel cup-point set screw, keeping them securely in place while making them truly re-useable, and the set screw clamps to the spoke -- NOT the spoke nut or nipple so they work with outer-spoke rims! No-Mar wheel weights also have flat ends so that you can "stack" them on a single spoke to get the perfect balance. Features: CNC machined brass construction Stainless steel hardware Compatible with tube and tubeless type rims No-Mar wheel weights are reusable Set screw is 5/64 allen The Motion Pro AXIS Truing / Balancing Standis the goods: CLICK HERE Make sure the lock screws stay locked with STUCK NUTZ: CLICK HERE Note: For reference, adhesive-backed weights are commonly available in 7 gram increments (0.25 Oz). Also for reference, if you're trying to balance a wheel with a Nuetech Tubliss Gen 2.0 Kit, you're likely going to need around 4.5 Oz. Specs: Precision CNC-machined wheel weights have a 3/16" (4.75mm) wide slot designed to fit 99% of standard factory wheel spokes. All weights include a 5/16" (8mm) counterbore on one end to allow the weight to fit over most spoke nuts/nipples (1/4 oz. size weights have a 5/16" (8mm) bore for the entire length of the weight and can be attached to either the spoke or the spoke nut/nipple as desired). Outside diameter of each weight is approximately .618" (15.7mm). Lengths vary depending on the designed weight.
Related
Related
Related
Related