No Wrench Ground Anchor

Nature Outfitters Verified independent store

→

***THIS IS A SPECIAL ORDER ITEM DUE TO SHIPPING SIZE AND WEIGHT RESTRICTIONS. PLEASE CALL OUR OFFICE TO PLACE YOUR ORDER*** Chance® No-Wrench Screw Anchors may be installed by hand or machine. The Thimbleye® Eye or Tripleye®Eye on the rod has a large opening to admit a turning bar for screwing the anchor down. The eye will also fit into an adapter available from most hole-boring machine manufacturers so the anchor may be power-installed. The No-Wrench Screw Anchor consists of a drop-forged steel Thimbleye Eye or Tripleye Eye rod welded to a steel helix. The entire anchor is hot-dip galvanized for long resistance to rust. NOTE: If hand installed, holding capacity may be reduced by as much as 10% to 20%. Capacity ratings apply to properly installed anchors only. Failure to install within 5° of alignment with the guy load will significantly lower strength. Description Hot dipped galvanized per ASTM A153 Number of Helices: 1 Eyenut Style: Tripleye No-Wrench Screw Anchors can be installed to a greater depth to reach a firmer soil by using an extension rod. Sizes 8" X 66" Tripleye Torque rating: 1000 ft-lbs Anchor Helix Diameter: 8in Length: 66 in Rod Diameter: 1in Weight: 21.1lbs Recommended for use on low ropes courses 10" X 66" Tripleye Torque Rating: 2300 ft-lbs Anchor Helix Diameter: 10in Length: 66 in Rod Diameter:1.25in Weight: 30.5lbs Recommended for use on low ropes courses (Standard) 10" X 96" Tripleye Torque Rating: 2300 ft-lbs Anchor Helix Diameter: 10in Length: 96 in Rod Diameter:1.25in Weight: 42.2lbs Recommended for use on high ropes courses (Standard) 14" X 96" Tripleye Torque Rating: 2300 ft-lbs Anchor Helix Diameter: 14in Length: 96 in Rod Diameter:1.25in Weight: 55lbs Recommended for use on high ropes courses Show more