Ensure FDNY compliance with a “Non-Automatic Sprinkler In Basement” sign, required to clearly identify buildings where basement sprinkler systems are not automatic. Improve emergency response visibility, reduce risk of delays, and meet NYC Fire Code requirements with durable, clearly legible signage. Dimensions: 10" x 12" Materials: .02in Reflective Aluminum What This Sign is For: This sign alerts emergency responders and building occupants that the basement sprinkler system is non-automatic, meaning it requires manual activation. It provides critical information during fire incidents so that the Fire Department can adjust response strategies accordingly. Legal Requirement Explained: Under the NYC Fire Code (FC §901 and §903) and applicable NFPA standards, buildings must clearly identify the type and condition of fire protection systems.Where a sprinkler system is not automatic, signage is required to prevent confusion during emergencies. Without proper labeling, responders may incorrectly assume full automatic coverage, potentially delaying manual intervention and increasing risk. Who is Required to Post This Sign: - Buildings with non-automatic sprinkler systems in basements- Older or partially upgraded buildings with mixed fire protection systems- Commercial, industrial, and certain multifamily residential buildings- Any structure where manual sprinkler activation is necessary in specific areas Where We Recommend This Sign Be Posted: - At or near the main building entrance- At the fire department connection (FDC), if applicable- At sprinkler control locations or riser rooms- In any location where the system condition must be clearly visible to FDNY personnel upon arrival Unacceptable Locations to Post This Sign: - Inside rooms or areas not immediately visible to first responders- Behind doors, equipment, or obstructions- In low-light or visually cluttered areas where readability is compromised- Mounted in locations far from entrances or fire system components- Using temporary, damaged, or non-durable signage Recommended Height / Installation Requirements: - Install at eye level (typically 48”–60” above finished floor)- Must be securely mounted and permanent- Use high-contrast, legible lettering for visibility in emergency conditions- If located outdoors, signage must be weather-resistant and durable- Position must allow for clear visibility from the approach path of emergency personnel Disclaimer: The information provided is intended as a general guide based on commonly referenced NYC Fire Code and industry standards. Specific requirements may vary depending on building classification, system configuration, and local authority interpretation. Always consult the NYC Department of Buildings (DOB), FDNY, or a licensed professional to confirm compliance for your property.
