NST Audio VMX88 Audio Matrix Processor The NST Audio VMX88 delivers all the benefits and experience of our live sound filters and dynamics algorithms in an installation product. The 8 analogue inputs have individual compressors, as well as a 24dB/Oct high pass filter, 8 bands of parametric EQ and up to 1.3 seconds of delay. The full matrix mixer allows mixing of not just the analogue inputs but also 8 channels of networked audio (Dante + AES67) inputs to any output channel. Audio channels can be routed to the 8 channels of networked audio outputs from multiple stages in the audio chain to give flexibility in system design. All of the 8 analogue outputs have 16 bands of parametric EQ, 48dB/Oct high and low pass filters, up to 1.3 seconds of delay as well as our high performance, two-stage PXL limiters for high performance loudspeaker protection. All analogue audio connections are on Phoenix-type 3-pin 5.08mm pitch connectors. The 4 GPI connections allow configurable actions such as fire alarm mutes and preset recalls. Up to 100 presets can be stored with recall options allowing selective recall combinations of input, matrix and output sections. Our D-Net control software for PC, Mac and iPad gives you complete control over ethernet and wifi. The VMX88 is also fully compatible with all our Venue Remotes for simple, flexible user control. Control via third party systems such as Crestron™ is available via our simple ethernet control protocol. NST Audio VMX88 Specifications: Analogue Inputs – 8 Electronically Balanced, Phoenix connectorsCMRR: >60dB @ 1kHzSNR: 119dB ‘A’wtdTHD+N (+19dB @ 1kHz): 0.0007%Maximum Level >20dBuInput Impedance: 10k Balanced Analogue Outputs – 8 Electronically Balanced, Phoenix connectorsSNR: 122dB ‘A’wtdTHD+N (+19dB @ 1kHz): 0.00029%Maximum Level: >20dBu, Source Impedance: 119dB ‘A’wtd (in-out analogue)Latency: 0.427mS (in-out analogue, 96kHz) Processing [96kHz] Input Gain (per channel) : -30 to +15dB in 0.1dB steps, mute, phaseInput Delay (per channel) : 0 to 1.3s in 10.4uS stepsInput Compressor (per channel) : Threshold (-30 to +22 dBu), Attack, Release, Ratio, Soft-KneeInput Parametric EQ (per channel) : 8 bands – parametric, low shelf, high shelf, notch, band-passInput Dynamic EQ (per channel) : 2 bands – parametric/low shelf/high shelf, boost/cut above/below, threshold, ratio, attack, releaseInput High-Pass Filter (per channel) : Up to 24dB/octave (Bensen / Butterworth / Bessel / Linkwitz-Riley) Routing Inputs to Outputs: Full matrix mixer including all local and Dante inputs to local outputs Output Parametric EQ (per channel): 16 bands – parametric, low shelf, high shelf, notch, band-passOutput High-Pass and Low-Pass Filter (per channel) : Up to 48dB/octave (Bensen / Butterworth / Bessel / Linkwitz-Riley)Output Gain (per channel) : -30 to +15dB in 0.1dB steps, mute, phaseOutput Delay (per channel) : 0 to 1.3s in 10.4uS stepsOutput Limiter (per channel) : Threshold (-50 to +22dBu), attack, release, auto attack/release option Presets : Up to 100 Networked Audio : 8in / 8out Dante channels on dual redundant RJ45 connectors Comms : 100Mbps Ethernet on rear panel (RJ45 connector) Power Requirements 3-pin IEC input, fused90-250VAC, 50-60Hz < 20W Dimensions Height : 44mm (1.75inch) 1UDepth : 170mm (6.75 inches)Width : 482mm (19 inches) Weight Net : 2.2kgShipping : 3.4kg
