Highly Accurate CD Transport with Sampling Rate Converter The NuPrime CDT-10 is the ultimate professional music CD transport with powerful DSP-based decoder that provides all Red Book error-correction capabilities with master-clock control of the entire decoding system, thus lowering jitter significantly. The transport’s single speed minimizes vibration and unbalanced discs. A selectable sampling rate converter (SRC) up samples the CD format to higher sampling rate with ultra-low jitter and distortion. CDT-10 Design Philosophy & CDT-8 Pro Comparison CDT-10 extends the exceptional digital design of CDT-8 Pro with enhanced AC noise filter (inherited from Evolution DAC) and power circuit. But to be considered as the ultimate CD transport, CDT-10 design philosophy is to minimize every possible mechanical vibration. The CDT-10 chassis design has similar structural integrity as a submarine (tubular structure with vertical & longitudinal rigidness) evenly distribute vibration. The transport mechanism is further sandwiched with aluminum plates to reduce vibration. Features: Highly Accurate CD Playback A powerful ARM chip LPC2103F CD reads, writes and controls error correction Philips SAA7824HL high-end laser reads/writes head control and decodes chips Supports CD-DA CD-R, CD-RW Algorithm reduces digital interference resulting in extremely low jitter Coaxial output with a dedicated isolation transformer Low jitter I2S output for professional use Sampling Rate Converter The sampling rate of CD playback can be up sampled to PCM and DSD, from 44.1kHz to 768kHz or DoP256 The conversion is achieved by up-sampling to mega hertz before down converting to the targeted sampling rate with ultra-low jitter and distortion Power and Mechanical Custom R-type professional transformer with shielding Low power consumption in Standby Mode Isolation shielding of CD transport from electronics and power supply CD transport stabilizing design AC filter NuPrime vibration-free isolation feet High quality aluminium remote control Available in black or silver anodized aluminum finish Specifications: Outputs: Optical Output (up to 24 bits / 192 kHz) (DoP64) Coaxial Output (up to 24 bits / 768KHz) (DoP256) HDMI I2S Output (up to 24 bits / 768KHz) (DoP256) AES / EBU Output (up to 24 bits / 768KHz) (DoP256) *Note that the I2S output is for connecting with other NuPrime products and may not work with other devices. General: Optical Sampling Rates Converter (SRC): 44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHz, DoP64 Coaxial Sampling Rates Converter (SRC): 44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHz, 352.8KHZ, 384KHz, 705KHZ, 768KHZ, DoP64, DoP128, DoP256 HDMI I2S Sampling Rates Converter (SRC): 44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHz, 352.8KHZ, 384KHz, 705KHZ, 768KHZ, DoP64, DoP128, DoP256 AES / EBU Sampling Rates Converter (SRC): 44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHz, 352.8KHZ, 384KHz, 705KHZ, 768KHZ, DoP64, DoP128, DoP256 Bit Resolution: 24-bits Dimensions: 215 mm W x 382 mm D x 59 mm H (including feet) Weight: 4.5Kg AC Fuse: Slow-blow, 1A, 250VA Worldwide AC voltage: 100VAC~240VAC
