Nylon Plastisol Ink (PFNP Series) bonds aggressively to nylon, polyester and coated fabrics — jackets, bags, athletic gear, performance wear. High opacity, bleed-resistant, and soft enough that the print does not stiffen the garment. Stocked in 16 colors chosen for team and athletic work. Any Pantone color matched to order — see below. Read this first: catalyst required This ink needs a Nylon Catalyst to bond to nylon. Add 15–20% catalyst by weight. Mix only what you will print today. Once catalyzed, the ink starts to cure in the bucket. It will harden, and hardened ink cannot be recovered — not by stirring, not by reducer. Mixed too much? The ink is not wasted. Un-catalyzed ink from the same bucket prints fine as a general all-purpose plastisol on cotton and blends. It simply will not bond to nylon without the catalyst. So order what you need for the nylon job — whatever you do not catalyze still earns its keep on the next cotton run. Why printers use it Bonds to nylon — catalyst-activated adhesion on the substrate most plastisols slide straight off. Ultra bleed-resistant — holds back dye migration on synthetic and sublimated garments. High opacity — bold color on light and dark fabric. Soft hand — a smooth finish that does not compromise durability. Creamy consistency — easy ink flow, effortless printing. Quick flash and cure — built for production speed. Phthalate-free formulation. Substrates Nylon — jackets, bags, performance wear (catalyst required) Polyester and sublimated garments Coated and treated fabrics Cotton and blends (un-catalyzed, as a general-purpose ink) How to run it Catalyst 15–20% by weight — required for nylon adhesion Pot life Single session. Mixed ink hardens and cannot be reused. Mesh 110–160 for best opacity and coverage Squeegee 65–75 durometer, medium to firm pressure Stroke Medium flood, firm print stroke for an even deposit Flash 250°F (121°C) for 3–5 seconds Cure 320–330°F (160–165°C) for 40–50 seconds Post-press A quick double press improves durability Storage 65–90°F (18–32°C), cool and dry Need a color we do not stock? We are a Pantone® certified company. Our proprietary UMX (Ultimate Mixing System) matches any Pantone® color in this series — and in plastisol, solvent, UV or water-based ink. Every batch measured against the current Pantone® Formula Guide and First Edition PLUS Guide Evaluated under professional D50 lighting Standard turnaround 48–72 hours (metallics may take longer) Free UMX software: umxsystem.com Monitor colors shift between screens — please pick from a physical Pantone® guide and give us the number. Handling Wear gloves and safety glasses when handling inks. Use in a well-ventilated area. Do not leave mixed ink exposed to air — hardened ink cannot be reused. Questions? Talk to us. Not sure how much catalyst your run needs, or whether nylon is the right series for your substrate? Call us before you mix. Total Ink Solutions200 South Newman Street, Unit 4 & 5Hackensack, NJ 07601Phone: 201-487-9600 · Fax: 201-487-9620Email: [email protected]
