RTS ODIN OMNEO digital intercom 16 port matrix The ODIN Digital Intercom is a highly scalable intercom system in a 1RU (Rack Unit) package. As your capacity needs to evolve, a single ODIN can grow from 16 ports to a maximum of 128 ports. A maximum of eight ODIN units can be interconnected via an optical Inter-Frame Link creating a single matrix with up to 1024 ports. The total number of licensed ports may be allocated freely to any port hardware type supported by the unit. The front panel has been designed to incorporate a User Interface as an alternative option to AZedit that supports the most common setup and configuration tasks. The AZedit and IPedit software applications have been updated to support ODIN. Featuring connectors for AIO, OMNEO and two-wire technology, ODIN supports keypanel technology going forward and, as always, RTS legacy keypanels. OMNEO is standard on RJ-45 connectors or is available using optional Optical Fiber SFP connectors. Three flexible redundancy options are available for multiframe ODIN systems: Backup and Restore, Frame Swap and Redundant Frame Operation. Specifications Power Supply: Type Locking IE320 C14 style connector (2 connectors, fully redundant load-sharing power supplies) AC Input 100VAC – 240VAC, 60/50Hz, 0.5A / 0.35A Maximum Power Consumption 47W (based on 120VAC)Note: Lighted power buttons on front panel control DC voltage feed to internal circuitry; they do not disconnect AC from the internal power supplies. Power cords must be fully removed from unit to safely disengage internal power. Environmental: Operating Temperature 32°F – 113°F (0°C – 45°C) Storage Temperature -4°F – 158°F (-20°C – 70°C) Dimensions: 19" w/ rack ears (17.3" w/o rack ears) W x 1.7" H x 14.3" D (including connectors) (482.6 mm w/ rack ears [439 mm w/o rack ears] W x 43.7 mm H x 363.5 mm D [including connectors]) Weight: ODIN Matrix 11.5lbs (5.2kg) Optional Mounting Bracket 0.86lbs (390grams) AIO 4-Wire Analog: Connectors 16 RJ-45 connectors Signal Format Differential RX/TX audio with differential RS-485 control data Wiring Scheme Both 568B & USOC supported A/D and D/A Resolution 24bits Max Input Level (balanced) +20dBu w/o clipping Digital Input Gain Programmable (-20dB – +20 dB) Input Frequency Response +1dB/-3dB from 200Hz – 20kHz THD+N (8dBu input, unity gain) 0.025% non-weighted@1kHz 22kΩ Nominal Output Level 8dBu Digital Output Gain Programmable (-20dB – 20dB) Maximum Output Level (balanced) @ 600 Ohms 20 dBu w/o clipping Output Frequency Response +1dB / -3dB from 200Hz – 20kHz Output Noise Floor 80dB 2-Wire Party Line Analog: Connector two 3-pin female XLR connectors Modes/Port supported RTS CH1, RTS CH2Audiocom (1 channel)Clear-Com (1 channel)(Connections are DRY. NO dc voltage provided) 4W/2W Echo Return Loss >30dB Unbalanced Operation (RTS/Clear-Com) Output Level 0 dBu (nominal) Expected Termination Impedance 200 Ω Noise Contribution
