HC4-Plus versionincludes OLED Displayand RTC Clock Battery HC4-Base/HC4 P-Kit Base versiondoes not include OLEDDisplay and RTC ClockBattery, you can find it in recommended accessories See the Not Included section below for additional items needed and/or recommended for operation The ODROID-HC4 is a mini PC with a dual SATA drive dock which makes an affordable solution for a Do-It-Yourself Network Attached Storage (NAS) server. This server centralizes data and enables users to share and stream multimedia files to phones, tablets and other devices on a network. Ideal for workgroups, families, and single users. A wide variety of software is available to tailor the ODROID-HC4 to your specific needs. Upgrade the storage capacity of this server with one or two larger HDD/SSD. The HC4 is built with two high performance SATA port and a Gigabit Ethernet port, to build a faster network storage device, and also supports RAID configurations. The HC4 is designed to hold 2x 2.5 inch HDD/SSDs or 3.5inch HDDs in any combination. The HC4 is based on the very powerful Amlogic S905X3 chip, just like the ODROID-C4. It can run Samba, FTP, NFS, SSH, NGINX, Apache, SQL, Docker, WordPress and other server software smoothly with full Linux distributions like Ubuntu, Debian, Arch and OMV. Links to compliance documentation available at the bottom of this listing. Additional items required to operate - see "NOT INCLUDED" section below KEY FEATURES Amlogic S905X3 Processor Quad-Core Cortex-A55 (1.8GHz) 4GB DDR4 RAM with 32-bit bus width (PC4-21333 grade) Dual SATA-3 port for 3.5inch and/or 2.5inch HDD/SSD storage UHS-1 capable micro-SD card slot for boot media Gigabit Ethernet port (RTL8211F) 1x HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID) Digital audio over HDMI USB 2.0 Host UART serial console IR Receiver 1x DC Jack (5.5/2.1mm) rated for 14.5~15.5VDC 84 x 90.5 x 25mm 280g including heatsink, fan and case SPECIFICATIONS table { width: 100%; border-collapse: collapse; } table, th, td { border: 1px solid #ddd; } th, td { padding: 8px; text-align: left; } th { background-color: #f2f2f2; } Form Factor Board Dimensions: 84mm x 90.5mm x 25.0mmHeatsink Dimensions: 40mm x 32mm x 10mmWeight: 280g including heatsink, fan and case Processor Amlogic S905X3 ProcessorL1 instruction cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processorL1 data cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processorL3 data cache: 512KB, 16-way set associative (512 sets), 64 byte lines, shared by 4 processorsQuad-Core Cortex-A55 (1.800GHz)ARMv8-A architecture with Neon and Crypto extensionsMali-G31 MP2 GPU with 4 x Execution Engines (650Mhz) Memory DDR4 4GiB with 32-bit bus widthData rate: 2640 MT/s (PC4-21333 grade)1.2Volt low power design Storage 1x Micro SD slot (DS/HS mode up to UHS-I SDR104) Networking 1x GbE LAN ports (RJ45, supports 10/100/1000 Mbps)Realtek RTL8211F (Ethernet transceiver)LED indicatorsGreen LED: Flashing by data traffics at 100Mbps connectionAmber LED: Flashing by data traffics at 1000Mbps connection Video 1x HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID) Audio 1x HDMI digital output Cooler 1x Passive heatsink (40x32x10 mm) on the CPU of PCB board1x Hydraulic Bearing FANRated Voltage: 5VRated Current: 100mAMax Speed RPM: 4,000Air Flow CFM: 4.3Air Pressure (In H2O): 0.053Noise Level(dBA): 23.9Dimension: 40 x 40 x 10.6 mmWire & Connector: 80mm, 4 pin 1.25mm pitch External I/O 1x USB 2.0 host port1x Debug serial console (UART)2x SATA Connectors Other features IR receiver for remote controllerSystem LED Indicators:Red (POWER) - Solid light when DC power is connectedBlue (ALIVE) - Flashing like heartbeat while Kernel is running. Power 1x DC jack: outer (negative) diameter 5.5mm, inner (positive) diameter 2.1mmDC input: 14.5V ~ 15.5VDC 15V/4A power adapter is recommendedPower consumption with two ST2000DM006 HDDs:IDLE(with HDD in spin-down): ≃ 5.88WActive(using SAMBA): ≃ 15.59WSuspend: ≃ 0.29W NOT INCLUDED No power supply included - 15V/4A Power Supply recommended No microSD card included OLED display with integrated RTC battery is optional (included on the Plus model) USB hub recommended if connecting more than one USB device to the HC4 No WiFi included - Wired networks are preferable for NAS units due to bandwidth and reliability, but we have WiFi modules available if desired USB-UART module highly recommended for tinkering with u-boot, kernels, multiple installs and more LINKS ODROID-HC4 Wiki Page: https://wiki.odroid.com/odroid-hc4/odroid-hc4 How to install an operating system: https://wiki.odroid.com/odroid-hc4/getting_started/os_installation_guide Application notes: https://wiki.odroid.com/odroid-hc4/application_note/application_note Alternative heartbeat LED: https://wiki.odroid.com/common/application_note/external_connector/alternative_heartbeat_led OLED display how-to: https://wiki.odroid.com/odroid-hc4/application_note/oled CERTIFICATIONS FCC - https://wiki.odroid.com/_media/odroid-hc4/hardware/fcc_odroid-hc4.pdf CE - https://wiki.odroid.com/_media/odroid-hc4/hardware/ce_odroid-hc4.pdf KC - https://wiki.odroid.com/_media/odroid-hc4/hardware/kc_odroid-hc4.pdf VIDEOS Warranty is valid for 16 weeks, starting upon date of receipt.
Related
Related
Related