The Olight Baton 3 Pro was born as an upgrade of the previous Olight S2R version but increases its characteristics and power. With the Olight Baton 3, in fact, you pass to a maximum output of 1500 lumens, therefore 30% more than the previous version.Compared to the previous version, the proximity sensor has been technologically improved and has been designed to increase the light output of the flashlight during everyday use. The sensor allows the flashlight to decrease the light intensity if an obstacle is too close to the lens. This guarantees maximum safety in use. The Olight Baton 3 Pro is available for purchase in two different versions: there is in fact the possibility to choose the equipment with cold light LEDs from 5700 - 6700 K or with Natural light from 4000 - 5200 K. In this way it satisfies all the requirements. needs and can be useful for different scenarios. The user interface is managed entirely by a lateral electronic switch. It is concave and enlarged and this makes it very comfortable to touch and activate. In the center of the side switch there is a small status LED that informs the user about the amount of residual charge in the cell. When this is green it means that the cell capacity is over 60%, when it is orange 10 - 60%, when it is red 5 - 10%, flashing red less than 5%. There is direct access to moonlight mode by simply holding down the switch from the flashlight off. The power for this level is only 0.5 lumens and the runtime is 120 days. There is also direct access to the Turbo with a double click on the switch, and access to the strobe with a quick triple press of the switch. The Olight Baton 3 Turbo also has a very convenient timer function: it is in fact possible to set a timer of 3 or 9 minutes for the automatic shutdown of the flashlight. To activate it, just turn on the flashlight at the desired level, double click on the switch and continue to keep it pressed until the flashlight emits one flash (3-minute timer active) or two flashes (9-minute timer active). The power supply of the Olight Baton 3 Pro is guaranteed by a 3200mAh rechargeable 18650 lithium cell. This is recharged using the special magnetic USB cable supplied in about 3.5 hours. The tailcap is magnetic so the flashlight can be attached to metal surfaces and allows for hands-free use. Supplied with the torch comes an L-shaped metal support that can be installed for example on the wall and where the torch can be attached and stored when not in use. GENERAL DATABeam Distance: 574 ft (175 m)Max Performance: 1,500 lumensCharging Type: MCC 3 Magnetic Charging CableCompatible Batteries: Customized 3200mAh 3.6V 18650 Rechargeable Lithium-ion BatteryMax Light Intensity: 7,900 candelaLight Source: High Performance CW / NW LEDLens / Reflector Type: TIR Optic LensMode Operation: Side SwitchForm / Size Factor: Medium sizeSeries: Series Baton (EDC, General Use) LIGHTING LEVELSLEVEL 1: 1,500~600 lumensRun time LEVEL 1: 2 + 177 minutesLEVEL 2: 600~120 lumensRun time LEVEL 2: 180 + 25 minutesLEVEL 3: 120 lumensRun time LEVEL 3: 17 hoursLEVEL 4: 15 lumensRun time LEVEL 4: 100 hoursLEVEL 5: 0.5 lumensRun time LEVEL 5: 120 daysStrobe: YesSOS / BEACON: No TECHNICAL CHARACTERISTICSWaterproof: IPX8Weight: 3.63 oz (103 g)(Battery Included)Length: 3.99 in (101.4 mm)Head Diameter: 0.91 in (23 mm)Body Diameter: 0.91 in (23 mm)Use: Camping, Hiking, Mountaineering, HouseholdPACKAGE CONTENTSBaton 3 Pro (Battery Included) x1MCC3 Charging Cable x 1L-shape Stand ×1Pouch ×1User Manual ×1
