OM-DAQXL-1-SAA 8-channel touch screen data logger with USB communications (Aus/NZ version) This is an 8 channel analog input portable data logger with a 7 inch resistive touch colour display. All inputs are programmable and can be configured for millivolts, volts, milliamps, thermocouple, RTD, thermistor, strain gauge, or frequency. All the menus, selections, and configurations can be done from the display touch screen. The unit also has 4 digital inputs, 4 digital outputs, 4 alarm outputs, one USB host port and one USB device port. The unit also has 3 LEDs for different indications (Power, Alarm and Logging). The OM-DAQXL comes complete with protective rubber boot, rechargeable lithium ion battery, 32 GB SD card, one plastic stylus, 1 GB USB thumb drive, 1.8 m (6') USB cable, 1.8 m (6') digital I/O cable, alarm/excitation terminal block, universal AC adaptor, screwdriver, quick start guide, set of 5 PTFE insulated Type K thermocouples, set of 5 ferrites to install on the thermocouple inputs (for noise reduction) and crimp-on ground lug. The unit can be wall mounted using the provided keyhole mount or operated on a bench using the tilt stand. The USB Wi-Fi Dongle will come in a separate package for '-EW' Models. Home ScreenThe home screen is the main screen of the data logger’s user interface. It is divided into 3 distinct sections as shown on the PDF. Digital Display ViewStatus/Information Display: This status bar provides information such as Battery Charge percentage, System Clock (displays current Time & Date), Lock/Unlock data logger, status of the 4 Alarm Outputs, and Logging Mode indication. Data Display Area: This is the area where different inputs (up to 4 Channels) are displayed vs. time. The data is displayed in 4 different ways: Waveform, Waveform & Table, Table only, and Digital. In the Digital view, each channel name and number are displayed along with the value. Navigation Toolbar: This toolbar provides access to all the functions and menus of the data logger. You can extend or retract the toolbar by pressing the Tool button. The following flow chart shows all the functionalities of the buttons of the toolbar. Standalone OperationThe OM-DAQXL’s touch screen user interface (UI) makes configuring the data logger for operation straight forward and simple. Recorded data files can easily be reviewed and analyzed on the OM-DAQXL. For data analysis on a computer, simply transfer the data file from the SD card or USB thumb drive to the PC and open the selected data file into Excel® or other data analysis software. SPECIFICATIONSScreen: 7 inch, TFT, resistive touch comes with plastic stylusRubber Boot: BlackAnalog Input Type: Thermocouple, thermistor, RTD, strain gauge, DC voltage, DC current Thermocouple Types: J, K, T, E, R, S, B, C, N Thermocouple Accuracy: Type J or K: ±(0.15% of rdg + 1.1°C) Type T, E or N: ±(0.15% of rdg + 1.7°C) Type R, S, B or C: ±(0.15% of rdg + 2.0°C) RTD Types: Pt100, Pt500, Pt1000 (0.00385 or 0.00392 curve); 2, 3 or 4-wire RTD Accuracy: ±(0.25% of rdg + 1°C) Thermistor Types: 2252Ω/10KΩ Thermistor Accuracy: ±1.0°C DC Voltage Input Ranges: ±50 mV, ±100 mV, ±1V, ±5V, ±10V, ±20V, ±50V DC Current Input Range: ±20 mA DC Voltage/Current Accuracy: ±0.1% of FS Strain Gauge Type: 100Ω full bridge, 350Ω full bridge Strain Gauge Excitation: 5V, 10V (only available on channels 1,3,9,11 )Digital Input Type: Pulse/Frequency Frequency/Pulse Input: 0 to 250 KHz Frequency Accuracy: ±2 HzSampling Rate: 125 s/sec (Max) to 1 s/hour (Min)Maximum Sampling Rate per Number of Channels (Analog and Digital): 1 Channel: 125 s/sec 2 Channels: 50 s/sec 4 Channels: 25 s/sec 8 Channels: 10 s/sec 16 Channels: 5 s/secLogging Rate: 125 s/sec (Max) to 1 s/hour (Min)Maximum Logging Rate per Number of Channels (Analog and Digital): 1 Channel: 125 s/sec 2 Channels: 50 s/sec 4 Channels: 25 s/sec 8 Channels: 10 s/sec 16 Channels: 5 s/secExcitation to Power External Transmitter: 24 Vdc @ 50 mA output–set in data session settingFilter Options: Per channel selectable moving average filter: None, 2, 5, 10, 20 or 100 samplesNumber of Samples for Moving Average Filter per Channel: Up to 50 samplesMath (Virtual) Channels: 8 or 16Digital Inputs: 4 Schmitt trigger based inputs Range: 0 to 24 Vdc single-ended Logic High Threshold: 2.5V Logic Low Threshold: 1.5VDigital Outputs: 4 channels, open collector, 5V @ 50 mAAlarm Output: 4, Open collector, 30V @ 500 mAAlarms per Channel: TwoAlarm Types: High, low, windows in, windows out, open sensorAlarm Latching: Settable in alarm menuOn Alarm Event: Map to 4 alarm outputs, take screen shot, sound buzzerLogging Conditions: On command or based on trigger conditionsStart and Stop Trigger Conditions: Timer, date and time, weekday and time, alarm output, external triggerMemory: Internal: 1 GB SD Card: 32 GB USB Drive: 32 GBUSB Ports: One host and one deviceBattery: Rechargeable lithium-ion; 7.2V @ 4.8 AhBattery Life: 4 to 8 hours based on display settingDC Adaptor: 12 Vdc @ 5AOperating Environment: 0 to 50°C (32 to 122°F), 0 to 95%RH non-condensingGeneral Dimensions: 28.6 L x 15.24 H x 6.35 cm D (9 x 6 x 2.5")Weight: 1.13 kg (2.5 lbs)Supported Wireless Type: 802.11B, 802.11G, 802.11nSupported Encryption: WPA, WPA2 Max. Throughput: 150Mbit/s Max. Range: Various depends on Wireless RouterEthernet Version Interface: RJ45 port Recommended Ethernet Cable: CAT5 shieldedFor Connectivity: Support Modbus Protocol (no need to mention RTU/ TCP/IP) Support OPC UA/DA via Omega Enterprise Gateway Support WebAPI via Omega Enterprise Gateway Click here for product datasheet
