Room to stretch out — and sink right in. The Omnitub Sheer 1400 is the longest tub in the Sheer range: a full 600 mm deep soak over a generous 1400 × 700 mm footprint. Lie back at full length, shoulders under, without surrendering a single millimetre of depth. The newest size in the collection — handmade to order in Somerset, England. The long soak, without the sprawl Most long baths buy their length by going shallow and wide. Sheer refuses the trade. Near-vertical walls — just a 25 mm taper over the entire 600 mm depth — hold the water high and close around you the whole way down the tub, so the extra length is all soak, not spillage. Slim on the floor, immense inside. Dimensions External footprint: 1400 × 700 mm Internal soaking depth: 600 mm Overall height (rim to underside, excluding feet): 625 mm Internal opening: 1275 mm long × 650 mm wide at the rim (near-vertical walls to a 1225 × 600 mm base) Flanges: 100 mm at the tap/waste end, 25 mm on the other three sides Waste: ∅52 mm (1½” BSP), 215 mm from the tap end Four self-levelling feet Built to last a lifetime Standard 7-layer Omnigel built-up system — rigid, warm to the touch, hand-polished, no flex Colour runs right through the Omnigel, so it can never chip or fade off the surface Insulation upgrade available (25–100 mm) for outdoor, commercial and cold-plunge use 30-year manufacturer warranty — built to outlast the room around it Made in your colour Choose White, any RAL colour or BS 4800, or your own paint-sample match — manufactured into the material, never sprayed on. Use the colour selector to preview your finish, or open it in OmniStudio. Pre-order — ships mid September 2026 The Sheer 1400 is available to reserve now. Each one is handmade to order in Somerset; place your order today at today’s price and your tub is built and dispatched from mid September. Free UK Mainland Named Day Delivery — England, Scotland and Wales. Northern Ireland and the UK islands are a flat £120 inc. VAT. International shipping to 220+ countries with live rates at checkout. 100% payment taken at order. Finish — Hand-Polished or Matte Every Omnitub is hand-polished to a deep, reflective finish as standard — a step above a sprayed gloss, with the colour cast right through the Omnigel rather than painted on. Prefer a softer, contemporary look? Choose Matte: a separate hand-finishing process applied after the polished build, giving a fine, low-sheen surface with the colour still cast through the Omnigel. As an additional hand-finishing stage, Matte adds around 5 working days to your build and 25% to the price. You choose your finish — Hand-Polished or Matte — inside the OmniStudio, alongside your colour, waste and size. Design yours in the OmniStudio →
Related
Related
Related
Related